Siemens SINAMICS S120 Getting Started page 83

1. Open the "Power Modules" item in the hardware catalog.
The following Power Modules are available for selection:
– AC Power Module
2. Select the required, unspecified Power Module in the device overview.
Figure 5-15
3. Drag the unspecified Power Module into the device view.
Figure 5-16
The DRIVE-CLiQ connection is automatically established.
4. In the device view, click the Power Module. Make sure that you click on the white area of
the Power Module.
5. Open the Inspector window if it has still not been opened or displayed.
Getting Started, 12/2018, 6SL3097-5AG30-0BP0
Power Module selected
Power Module inserted
5.4 Creating a project offline in Startdrive
Commissioning
81