Getting Started, 12/2018, 6Sl3097-5Ag30-0Bp0 - Siemens SINAMICS S120 Getting Started

● North American market
SINAMICS S devices provided with one of the test symbols displayed fulfill the
requirements stipulated for the North American market as a component of drive
applications.
You can find the relevant certificates on the Internet pages of the certifier
(http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.html).
● Specification for semiconductor process equipment voltage drop immunity
SINAMICS S devices meet the requirements of standard SEMI F47-0706.
● Australia and New Zealand (RCM formerly C-Tick)
SINAMICS S devices showing the test symbols fulfill the EMC requirements for Australia
and New Zealand.
● Quality systems
Siemens AG employs a quality management system that meets the requirements of ISO
9001 and ISO 14001.
Not relevant standards
China Compulsory Certification
SINAMICS S devices do not fall in the area of validity of the China Compulsory Certification
(CCC).
EMC limit values in South Korea
The EMC limit values to be observed for Korea correspond to the limit values of the EMC
product standard for variable-speed electric drives EN 61800-3 of category C2 or the limit
value class A, Group 1 to KN11. By implementing appropriate additional measures, the limit
values according to category C2 or limit value class A, Group 1, are observed. Further,
additional measures may be required, such as using an additional radio interference
suppression filter (EMC filter).
The measures for EMC-compliant design of the system are described in detail in this manual
respectively in the EMC Installation Guideline Configuration Manual.
The final statement regarding compliance with the standard is given by the respective label
attached to the individual unit.
Ensuring reliable operation
The manual describes a desired state which, if maintained, ensures the required level of
operational reliability and compliance with EMC limit values.

Getting Started, 12/2018, 6SL3097-5AG30-0BP0

Preface
9