Allarms (All) - TDE MACNO MINIOPD EXP User Manual

The characteristics of each connection are individually recognizable of
identification code as under report.
FIG. 4 (Connections CON)

7.2.4 ALLARMS (ALL)

Overall functions of protection of the converter, of the motor or in the
application whose status to active alarm or non active alarm it may be
visualized in the display. The actived protection, stops the converter and
does flash the display, excepted if it is disabled. With a single visualization
is possible have all the indications with the following:
For ex.
A03.L = power fault doesn't activate
The alarms are all memorized and so they remain till that is not missing the
cause of the alarm and have been resetted (input of resetting alarms
activate) or (C30 = 1).
FIG. 5 (Allarms ALL)
104