Application Parameters (App) - TDE MACNO MINIOPD EXP User Manual

7.2.2 APPLICATION PARAMETERS (APP)

For their definition refer to the description of the parameters. They are
distinguished in free parameters, some modifiable always (Online), other
only to converter not in run (offline), reserved, modifiable only offline and
after access code to the reserved parameters (P60), or reserved for the
TDE MACNO, visible after having written the access code TDE MACNO
parameters (P99) and modifiable only offline. The characteristics of each
parameter are recognizable from the code of identification as under:
FIG. 3 (Application Parameters PAR)
For example: P60 r = parameter 60: reserved
1P00 t = parameter 100 TDE MACNO
Reserved.
7.2.3 CONNECTIONS (CON)
They are certain connections that dimensions approach that are of
numerical value comes connected to a function or a clear command{for
example: ramp insertion, C26 = 1; or no ramp, C26 = 0; or save parameters
on EEPROM memory, C63 = 1}. They are in free connections, some of the
like modifiable always (Online), other with converter in stop (offline) and
reserved, modifiable only offline and after access code to the reserved
parameters (P60).
User's manual 103