Honeywell Galaxy Flex Installer Manual page 215

Galaxy Flex Installer Manual
Hash key (
)
#
Star key ( )
Power LED
The power LED indicates the status of the a.c. power supply and the stand-by battery.
Power LED
ON
Slow flash
Quick flash
Compliance
This product is suitable for use in systems designed to comply with PD6662:2004
and EN50131-1: 2006
Independently tested for compliance to EN50131-3: 2009 by BRE Global Ltd
Security Grade - 3
Environmental Class – II
ACE Type B
Used for the following:
as a toggle key to enable or disable programming options. For
example, enabling the OMIT attribute of a zone.
to give additional information on a programming options. For
example press
#
details of the user number, descriptor and keypad used to cancel
alarms or unset the system.
to activate the Duress and PA outputs.
Used for the following:
to correct or erase PINs in the CODES option and alpha-
numeric descriptors in the TEXT option.
to start printing from the current event when viewing option
Display Log [22].
to display the set status of the groups. When Show Status (refer
to option Show Status [58.6]) is enabled, pressing the
keys simultaneously when the normal banner is displayed
indicates the group set status.
A.C. status
OK
Fail
Fail/OK
Appendix G: Peripherals
while in option Display Log [22] to show
Battery status Fuse status
OK
OK
Low
and
OK
OK
Blown
#
215