Honeywell Galaxy Flex Installer Manual page 187

Galaxy Flex Installer Manual
DCM Security Dual mode [69.3.1.5.06.3]
This defines if access at a door requires dual authority or not via the assigned keypad. The
options are:
0=Disabled
1=Card and Card
2=Card and Pin
DCM Security Dual Time [69.3.1.5.06.4]
Option not available.
DCM Menu Recall [69.3.1.5.07]
This determines whether the user is allowed to apply the menu recall function at any DCM
reader. This is in addition to any DCM function that may be assigned. There are three
options as follows.
DCM Menu Recall Menu Function [69.3.1.5.07.1]
Depending on the level of access granted in Menu Access [68], the user can use their card at
a compatible reader to activate a single menu function selected from the available list (11-
72). To assign a new option press
option number directly, and then press
( ) to make the menu function not used.
DCM Menu Recall Menu Mode [69.3.1.5.07.2]
Use this option to control the menu function. There are two options:
1=Triple Repeat
2=Recall Button
DCM Menu Recall Keypad assignment [69.3.1.5.07.3]
Use this option to assign a specific keypad address to work in conjunction with a DCM. This
keypad is used to display the menu action assigned in 1=Menu Function.
Card Format [69.3.2]
Use this option to select the type of card used with the DCM reader. There are five options:
0=26 bit, 1=Crp 1K 35 bit, 2=37 bit no FC, 3=Northern 34 bit, 4=Custom.
4=Custom has a further four sub-options:
1=Format Name
2=Card Length
A card or a PIN is required to gain access.
Two cards are required to gain access.
A card and a PIN from the same user are required to gain access.
or until the required option is displayed, or enter the
A B
ent
The card is presented to the reader three times to activate the menu.
The recall button is pressed once to activate the menu.
The maximum number of characters in the name is 12.
Bit size options: 26, 27, 32, 34, 35, 37 or 40.
to accept the selection. Assign a double asterisk
Access Control [69]
187