Table of Contents
Advertisement
Galaxy Flex Installer Manual
Schedule [42.1.User code.4]
Use this option to enable a user to access the menu options for setting and unsetting. The
PIN code only operates during the OFF period of an assigned weekly schedule that is
created in option 65.1.
If a user attempts to use his PIN code during the ON periods of his assigned schedule, then
an illegal code event is logged and any outputs programmed as illegal code are activated.
Setting this option to 00=None means that PIN codes are always operational.
Note: This option does not control card access through doors. This is controlled by
templates and is allocated to a user in Template [42.1.User code.9].
Modify Group [42.1.User code.5]
Use this option to select the system groups that the user has access to and operational control
over. The Modify Groups option is only available when group mode is enabled (refer to
Groups [63.1]). The system defaults to groups disabled.
When you select the Modify Groups option, the groups currently allocated to the user are
displayed. All users default to group 1.
Pressing the group number toggles the group assigned to the user. Pressing 2 and 3 assigns
groups 2 and 3 to the user. Pressing 1 (when group 1 is already assigned) removes group 1
from the user code.
To assign group choice to the user, press . When the required groups have been assigned to
the user, press
to accept the programming and return to the previous menu level.
ent
Group options
Single Group
Multiple Groups
Group Choice
Notes:
1.
The manager, engineer and remote codes have fixed access to all system groups; this
cannot be reprogrammed.
2.
The manager, engineer and remote codes are assigned group choice by default. The
manager can have the group choice feature removed; the engineer and remote codes
have fixed group choice.
Users authorized to access Codes [42], can only assign the groups that have been
3.
assigned to their user code. A user who does not have access to group 4, cannot assign
group 4 to another user code.
A user can be assigned to any single group. In this case type 2 and
above users can access, set and unset the single group only.
Users can be allocated to more than one group in which case access
and operation is collective; the user cannot choose to operate on a
single or combination of the assigned groups.
Users can be allocated more than one group but also have the choice of
which of the allocated groups to view, set or unset. Pressing
assigning groups to the user assigns the group choice feature.
Codes [42, Quick Menu 7]
while
55
Hide quick links:
Advertisement
Table of Contents
