Honeywell Galaxy Flex Installer Manual page 125

Galaxy Flex Installer Manual
DTMF Channel Output Groups [56.1.01.1.1.7]
Note: The Groups attribute is only available if groups have been enabled on the system
(refer to Options [63]).
Use the Groups attribute to assign the channel to a group. A channel can be assigned to more
than one group. The channel only triggers when an event occurs on one of the groups
assigned to the channel. All channels default to all groups on the system.
When you select the Output Groups attribute, the groups to which the channel is assigned
are displayed.
Press the relevant number keys to toggle the status of the group, and then press
If the group number is displayed on the top line, then the group is assigned to the channel.
If a dash (–) is displayed, the group has been removed from the channel.
Group Status
This group attribute offers an additional feature that makes the operation of the channel
conditional on the set status of each of the system groups. A channel assigned Group Status
only activates if the set conditions of the programming are met, for example, an Intruder
channel can be programmed to activate only if groups 2 and 4 are set and group 3 is unset.
To assign the Group Status conditions, press
displayed on the bottom line with the current status. Press the relevant number keys to
toggle the status of the groups, and then press
group status conditions are:
S = Set - group must be set to allow channel to activate.
U = Unset - group must be unset to allow channel to activate.
− = Set or unset - channel activation is independent of the group status.
DTMF Acct/Channel [56.1.01.1.2]
When the account number is programmed using Telecoms Account No. [56.1.03], all 16
channels are automatically programmed with the same number. You can program each
channel with a separate account number if required.
Account number can be up to six digits long, however a four digit number is the standard.
Note: Changing the main account number overwrites all separate account numbers
previously programmed for channels 1 to 16.
When you select Acct/Channel the first channel is displayed. Select the required channel,
and then press . The account number currently assigned to the channel is displayed. Press
ent
to delete each of the digits, and then enter a new account number.
B
SIA [56.1.01.2]
The SIA (Security Industries Association) format is a protocol that transmits detailed
information, including zone descriptions, to a computer with suitable software or to an SIA
compatible receiver. The SIA format is capable of transmitting over 330 different events
(refer to Appendix B for further details).
Communications [56]
when selecting the groups. An arrow (>) is
to accept the programming. The available
ent
.
ent
125