Honeywell Galaxy Flex Installer Manual page 126

Communications [56]
On selecting the SIA format, you are prompted for the required SIA level. There are five
SIA levels available:
0 (default) – Basic event information with 4 digit account number.
1 – as level 0 plus 6 digit accounts.
2 – as level 1 but with event modifiers.
3 – as level 2 but with text descriptions.
4 – as level 3 but allows control commands to be received by the control panel.
SIA Trigger Events [56.1.01.2.level.1]
When you select the option, the first trigger event and its On/Off status is displayed (see
Table 10 for a list of available triggers). These are the events and alarms that are transmitted
to the ARC or computer. If the trigger status is set to On, an event activation results in
transmission of the event details to the receiver.
The table below shows the list of signalling triggers that are available to the Telecom
module, the USB module, the ISDN module and the Ethernet module.
1=Status
To modify the trigger, select the required trigger type using
program the status to On press
and return to the previous menu level.
Programming the SIA Format with Groups Enabled
If groups have been enabled on the system (refer to Options [63]) the SIA format option
alters, and an additional level is added.
1=Trigger Events
Press to display the first trigger event. The keypad shows the trigger, the trigger status
ent
and the groups assigned.
1=Status As described above.
126
No. Trigger Event
1 PA/Duress
2 Intruder
4 Security
5 Custom Zones
6 Fire
7 Set Fault
8 Omit
9 Tamper
10 Setting
11 Reset/Cancel
Table 10 Trigger Events
, to set it to Off press
1
Galaxy Flex Installer Manual
No. Trigger Event
12 Modules/Comms
13 Elec Status
14 Menu Access
15 Trouble
16 Log Zone
17 Max Tag
18 Zone Restoral
19 RF Supervision
20 Fault
and
A
. Press
0 ent
and press . To
B ent
to save the programming