Honeywell Galaxy Flex Installer Manual page 56

Codes [42, Quick Menu 7]
Card Number [42.1.User code.6]
Card Number contains one of the following numbers:
the serial number from an access control card.
the 10 digit number etched onto the card/fob/tag.
the decrypted code of cards/tags self learned into the system for use with the KeyProx.
These numbers identify the card/tag/fob to the system and reference it to the user it has been
assigned to.
By default card number is empty.
To enter the required number:
1. Do one of the following:
Enter the unique 10 digit number laser etched onto the card/fob/ tag.
Press and 1 simultaneously on the KeyProx, and then present the card/fob to the
A
KeyProx reader within five seconds. The decrypted number in the card is self-
learned by the system and displayed on the KeyProx.
2. Press to save the programming and return to the previous menu level.
ent
Notes:
1. A card number can be assigned to a user code that does not have a PIN allocated to it.
All other options assigned to this user are valid for the card/fob/tag button programmed.
2. For access control cards, when the serial number is not printed on the card, the card
number can be learned using the Add Batch [42.2.1] option.
MAX Function [42.1.User code.7]
The card/fob/tag/button can be assigned a single menu option. The user must be authorized
to access the menu option assigned to the MAX, either by the user level assigned or the
Menu Access [68] option. The default option is NOT USED.
To assign a new option:
1. Do one of the following:
Press or
A
Enter the option number directly.
2. Press to accept the selection.
ent
MAX Keypad [42.1.User code.8]
The menu option assigned to the MAX card can be limited to operate on a single keypad.
When you select this option,
specified.
To specify a keypad:
56
until the required option is displayed.
B
is displayed indicating that a keypad has not been
Galaxy Flex Installer Manual