Shift Solenoid, Duty Solenoid And Valve Body - Subaru SVX 1992 Manual

3- 2 [w2C1]
AUTOMATIC TRANSMISSI ON AND DIFFERENTIAL
fly . ~ l
. .1 . _..
Be careful because oil flows from oil strainer .
REMOVAL AND INSTALLATION
(6) Remove control valve body .
C :
Remove 8 long bolts (Black) and 11 short bolts
(Yellow) .
1 . SHIFT SOLENOID, DUTY SOLENOID AND
Be careful because oil flows from valve body .
VALVE BODY
1) Removal
(1) Clean transmission exterior .
(2) Drain ATF completely .
Tighten ATF drain plug after draining ATF.
Tightening torque :
23 - 26 Nom (2 .3 - 2.7 kg-m, 17 - 20 ft-Ib)
(3) Remove oil pan and gasket .
Drain oil into a container .
(4) Disconnect solenoid valve connectors .
Remove connectors from clips and disconnect con-
nectors at 5 places .
For Duty sol . A
i
0 I For Sol . 2 (shift)
7 ~ For " Sol. 1 (shift)
Grounding
v O J
" Sol. 3 (shift)
J~ o r For Duty sol . B
1 O '
L
'
~`4
For ATF temp .
sensor
B3-273
Fig . 92
B3-227
Fig . 94
(5) Remove oil strainer .
Disconnect oil pipe by removing the two bolts, and
remove four bolts and oil strainer .
114
Short bolt (Yellow) 11 pcs
Long bolt (Black) 8 pct