Table of Contents
Advertisement
ENGINE
1) Remove drive plate.
To lock crankshaft, use CRANKSHAFT STOPPER
CJ
o
o
s
o
' sc
® .
o
\
D
CRANKSHAFT STOPPER
(49849 7200)
C2-284
Fig . 106
2) Remove oil separator cover .
3) Remove water by-pass pipe.
4) Remove water pipe .
5) Remove water pump and gasket.
6) Remove oil pump from cylinder block. Use a stan-
dard screwdriver as shown in Figure when removing oil
7) Removal of oil pan .
(1) Turn cylinder block with #2, #4 and #6 piston
sides facing upward .
(2) Remove bolts which secure oil pan to cylinder
block.
(3) Insert a oil-pan cutter blade between cylinder
block-to-oil pan clearance and remove oil pan .
Do not use a screwdriver or similar tool in place of
oil-pan cutter blade.
I
[W5A2] 2-3
Oilpan
cutter
C2-286
pump .
Fig. 108
Be careful not to scratch the matching surface of
cylinder block and oil pump.
8) Remove oil strainer .
9) Remove baffle plate .
10) Remove oil filter .
Fig . 107
57
Advertisement
Table of Contents
Troubleshooting
