Front Cushion Rubber - Subaru SVX 1992 Manual

ENGINE AND TRANSMISSION MOUNTING SYSTEM [w3Aoj 2-11
3. Front Cushion Rubber 1 1 %
LB
A: REMOVAL
1) Set the vehicle on lift arm .
2) Move damper, and open front hood fully.
3) Remove air intake system .
(1) Remove throttle body cover.
(2) Remove air intake boot .
4) Remove grille ASSY.
5) Remove radiator bracket and A/C condenser install-
ing bolts .
riy. 33
rig. 34
8) Support engine with a lifting device and wire ropes.
i _-7771-7
C2-108
Fig. 35
I-iy . ov
9) Remove left and right front wheels .
10) Raise the vehicle .
At this time, raise up wire ropes.
15
6) Disconnect 02 1 £r 2 (RH Ft LH) connectors .
7) Remove pitching stopper.
Protect throttle body with cloth, etc. so as not to
damage it by wire rope .