V-Belt Cover; Front Side Belt; Rear Side Belt - Subaru SVX 1992 Manual

Hide thumbs Also See for SVX 1992:
Table of Contents

Advertisement

PERIODIC MAINTENANCE SERVICES
[ 011331 1-5
3. REAR SIDE BELT
B : REPLACEMENT
(Driving Air Conditioner)
Before removing the rear side belt, remove the front
1 . V-BELT COVER
side belt.
1) Loosen the lock nut .
1) Remove drive belt cover .
(1) Remove the two bolts-
2) Loosen the lock bolt .
. ,y .
2. FRONT SIDE BELT
(Driving Power Steering Oil Pump and Alternator)
1) Loosen the lock nut .
2) Loosen the slider bolt .
I ly .
3) Remove the front side belt .
4) Install a new belt, and tighten the slider bolt so as to
obtain the specified belt tension shown in the above
table.
5) Tighten the lock nut .
Wipe off any oil or water on the belt and pulley .
rig. 4
3) Remove the rear side belt.
4) Install a new belt, and tense the belt with stay .
5) Tighten the lock nut so as to obtain the specified belt
tension shown in the above table .
6) Tighten the lock bolt.
oo °
Lock bolt
Stay
Lock nut
C1-041
Fig . 5
5

Advertisement

Table of Contents
loading

Table of Contents