Screw-Jack, Lift And Safety Stand - Subaru SVX 1992 Manual

1-3 [08021 GENERAL INFORMATION
2. SCREW-JACK, LIFT AND SAFETY STAND
Support locations
Screv
"
When removing rear body or suspen-
sion parts, place balance weights, etc.
in the trunk compartment, taking
into account the weight distribution
on the front and rear of the car;
then lift the vehicle up .
Lift
11
l11
))
J
J d
Safety stand
n <`
n~
c
~'
Cl-015
Fig. 16
a. Never get under the vehicle while it is supported only by the jack. Always use safety stands to support body
when you have to get under the car.
b. Block the wheels diagonally by wheel chocks .
c. Make sure the jack is set at the correct position on the flange of side still .
d. Be careful not to set the jack at the air flap portion .
14