Subaru SVX 1992 Manual page 560

AUTOMATIC TRANSMISSION AND DIFFERENTIAL [T5E4] 3-2
1 . MEASURE SIGNAL VOLTAGE OUTPUT EMIT-
TED FROM TCU .
1) Raise vehicle and support with safety stands.
On 4-wheel drive models, raise all wheels off ground.
2) Warm up the engine and transmission .
3) Move selector lever to "D ."
4) Measure signal voltage output emitted from TCU
while idling the engine .
Connector & terminal / Specked voltage :
(1368) No. 14 - No. 10 / 10 -14 V
2. CHECK HARNESS BETWEEN TCU AND SHIFT
SOLENOID 1 .
1) Disconnect connector from TCU .
2) Disconnect connector from transmission .
3) Measure resistance between TCU connector and
transmission connector, and between TCU connector
and body .
Connector Fr terminal/Specified resistance:
(1368) No. 14 - (1314) No. 3/0 i2
(1368) No. 14 - Body/1 MQ min .
(1368) No. 10 - (1314) No. 4/011
(1368) No. 10 - Body/1 MQ min .
3. CHECK SHIFT SOLENOID 1'S GROUND LINE .
1) Disconnect connector from transmission .
2) Measure resistance between transmission connec-
tor receptacle and transmission case .
Connector fr terminal / Specified resistance:
(T2) No. 4 - Transmission / 0 f2
4. CHECK SHIFT SOLENOID 1 .
1) Disconnect connector from transmission .
2) Measure resistance between transmission connec-
tor receptacle's terminals .
Connector fr terminal / Specified resistance:
(T2) No. 3 - No . 4 / 20 - 30 12
187