4-1 [W6A0)
SUSPENSION
b. Align locators when assembling front rubber cush-
ions to sub frame.
A-A'
C4-128
Fig. 60
c. When installing universal joint, refer to instructions
under "4-3. STEERING SYSTEM" as a guide.
d. Center roll connector as instructed under 5-5.
[WlEl] .
e. Purge air from power steering system (refer to 4-3.
[W5G0]).
f. When tightening lower arm-to-sub frame securing
bolts, make sure vehicle weight is on suspension .
g. Adjust wheel alignment.
24