AWD SYSTEM
[W2A2] 3-4
I
I
SIDE OIL SEAL PROTECTOR
r
(28099 PA000)
C4-152
(4) Completely insert DOJ into rear differential by
pressing rear housing.
Check that oil seal lip is not folded over inward .
Fig. 38
(2) Insert the spline shaft until the spline portion is
inside the side oil seal .
t Iy .
F-1y. 4V
V/y. wI
13) Reassembling procedure hereafter is the reverse of
the disassembling.
For installation of rear suspension parts, refer to "4-1
SUSPENSION".
19
(3) Remove the side oil seal protector .