Check Water Temperature Sensor - Subaru SVX 1992 Manual

FUEL INJECTION SYSTEM
[T9E2] 2-7
1 . CHECK WATER TEMPERATURE SENSOR .
1) Remove collector cover and air intake boot .
2) Disconnect connector from water temperature sen-
sor.
3) Measure resistance between water temperature sen-
sor connector terminals.
Terminal/Specified resistance
No . 1 - No . 2/20 - 30 kit [20°C (68°F)]
No . 1 - No . 2/0.3 - 0.4 kit [80°C (176°F)]
-E24
U
I ( U
U
l
i
Water temperature sensor
'~\I 1 \I
C2-351
Fig. 68
2. CHECK HARNESS CONNECTOR BETWEEN
ECU AND WATER TEMPERATURE SENSOR .
1) Disconnect ECU connectors .
2) Measure resistance between ECU connector and
water temperature sensor .
Connector & Terminal/Specified resistance
(1359) No. 3 - (E24) No . 1/0 f2
(1359) No . 21 - (E24) No . 2/00
65