Operation Of Indication Lamp - Subaru SVX 1992 Manual

3- 2 [M2301] AUTOMATIC TRANSMISSION AND DIFFERENTIAL
23 . Self-diagnosis System
1 . FUNCTION
The self-diagnosis system is capable of detecting any
trouble which has occurred in any of the following input
and output signal systems .
1~ Vehicle speed sensor 1
© Vehicle speed sensor 2
3~ Throttle sensor
® Shift solenoid 1
s) Shift solenoid 2
© Shift solenoid 3
Duty solenoid B
® Duty solenoid C
9~ ATF temperature sensor
® Ignition pulse
01 Duty solenoid A
® Atmospheric pressure sensor
The results of self-diagnosis are displayed by flashing
power indicator lamp .
(1) Repeated flashing at 4 Hz . ..Error such as battery
trouble
(2) Repeated flashing at 2 Hz .. .Normal
(3) Output of trouble code . . .Check faulty portion
(4) Continued lighting of lamp . ..Error in inhibitor
switch, manual switch, idle switch, or wiring
2. OPERATION OF INDICATOR LAMP
If trouble occurs in any of the self-diagnosis items, the
following display appears on the power indicator only
once directly after starting the engine .
Ignition switch ON
OFF
- - -
ON
Normal
2 secs.
OFF - -
ON
Abnormal 2 secs .
OFF - - -----
Blink (16times)
Immediately after engine starts
B3-524
Fig. 70
90