Transfer Oil Pressure Control Device - Subaru SVX 1992 Manual

AUTOMATIC TRANSMISSION AND DIFFERENTIAL
[M1703] 3- 2
3. TRANSFER OIL PRESSURE CONTROL DEVICE
The transfer valve body is bolted to the side of the
extension case through two gaskets and one separate
plate .
Operating oil for the transfer valve body is routed to the
extension case through a pipe connecting the discharge
circuit of the oil pump on the front of the transmission
case to the rear of the case . It is then delivered to the oil
pressure circuit provided in the plane on which the
transfer valve body is mounted .
This line pressure is reduced to a fixed level by the pilot
valve, and becomes the initial pressure of the duty
solenoid C . Line pressure is also delivered to the trans-
fer control valve where it is regulated by duty pressure
variations to control the oil pressure so that optimum
rear torque distribution is obtained according to running
conditions .
0=1-
,
:
D
(9Y
'
$or lawol
insfer)
C3-097
Fig. 31
23