Subaru SVX 1992 Manual page 121

2-11 Iw3B0) ENGINE AND TRANSMISSION MOUNTING SYSTEM
5) Install bolts which install power steering fluid cooling
pipe onto body .
6) Install exhaust system .
(1) Install front exhaust pipes.
Refer to C.2-9.
(2) Install OZ sensor harness to clip .
(3) Install under cover.
(4) Lower the vehicle.
In this time, loose wire ropes.
7) Connect Oz sensor 1 £t 2 connectors .
8) Remove wire ropes and lifting device .
9) Install pitching stopper.
10) Install air intake system .
(1) Install air intake boot .
(2) Install throttle body cover.
11) Install radiator bracket, and install A/C condenser to
body.
Fig. 45
12) Install grille ASSY .
13) Move damper, and close front hood .
14) Take off the vehicle from lift arms .
Refer to C. 1-3.
Fig. 44
Tightening torque : Nom (kg-m, ft-Ib)
To bracket side :
44 - 54 (4 .5 - 5.5, 33 - 40)
To body side :
47 - 67 (4 .8 - 6.8, 35 - 49)
18