P25] Demand Limit Menu - Mitsubishi Electric Evolution+ s-MEXT Technical Manual

Mask of the terminal
Adjustments
--------------- P24.48
Extern. T+H hum. Probe
updating diff.: 0.5%
--------------- P24.49
Extern. T+H tem. Probe
updating diff.: 0.5°C
Adjustments
--------------- P24.52
Supply T+H air temp.
probe adj.: 0.0°C
--------------- P24.53
Supply T+H Humidity
probe adj.: 0.0%
2.5.15

[P25] Demand Limit Menu

Accessible from: "Service" group.
Mask of the terminal
Demand
Limit
←
Demand Limit
Demand Limit
Not Available
Version 38
Parameter for setting the external air temperature reading resolution.
Parameter for setting the external air humidity reading resolution.
Visible only if the external serial T/H probe is enabled.
Parameter for calibrating the air delivery temperature / humidity sensor.
Visible only if the air delivery serial T/H probe is enabled.
↑
Access mask to "Demand Limit" menu.
↓
Screen shown if it is not possible to use the Demand Limit function.
Visible only in units with Small control system.
Description
Description
Par.N.
24.48
24.49
24.52
24.53
Par.N.
70