Table of Contents
Advertisement
DRIVER THERMISTOR OUT OF RANGE LOW - MHSAPM —
TEST
8
Disconnect the Driver Heated Seat Cushion 4-way connector.
Disconnect the Memory Heated Seat Adjustable Module C2 connector.
Turn ignition off.
Measure the resistance of the Driver Seat Temperature Sensor 5 Volt Supply wire
between the MHSAPM connector and the driver heated seat cushion connector,
harness side.
Is the resistance below 5.0 ohms?
Yes → Replace the Memory Heated Seat Adjustable Pedal Module.
→ Repair the open Driver Seat Temperature Sensor 5 Volt Supply
No
ELECTRICALLY HEATED SYSTEMS
ACTION
Perform BODY VERIFICATION TEST - VER 1.
circuit.
Perform BODY VERIFICATION TEST - VER 1.
399
Continued
APPLICABILITY
All
Advertisement
Table of Contents
