Table of Contents
Advertisement
POWER MIRROR
Symptom:
PASSENGER MIRROR VERTICAL OUTPUT SHORT TO GROUND -
PDM
When Monitored and Set Condition:
PASSENGER MIRROR VERTICAL OUTPUT SHORT TO GROUND - PDM
When Monitored: Whenever mirror is idle.
Set Condition: Driver circuit is shorted to ground.
DTC PRESENT
POWER MIRROR
PASSENGER MIRROR VERTICAL DRIVER SHORTED TO GROUND
PASSENGER DOOR MODULE
TEST
1
With the DRBIII , erase DTCs.
Cycle the ignition switch Off then back On.
With the DRBIII , read DTCs.
Did the same DTC return?
Yes → Go To 2
→ The conditions required to set the code are currently not present.
No
2
Turn the ignition off.
Disconnect the power mirror connector.
Turn the ignition on.
Using the DRBIII , erase DTC's.
Cycle the ignition switch Off then back On.
With the DRBIII , read DTC's.
Did the same DTC return?
Yes → Go To 3
→ Inspect the power mirror harness for a short, if OK replace the
No
POSSIBLE CAUSES
ACTION
Using the wiring diagram/schematic as a guide, inspect the
wiring and connectors.
Perform BODY VERIFICATION TEST - VER 1.
mirror.
Perform BODY VERIFICATION TEST - VER 1.
814
APPLICABILITY
All
All
Advertisement
Table of Contents
