Table of Contents
Advertisement
SKREEM
ANTENNA FAILURE —
SKREEM INTERNAL DTC FAILURE
TEST
1
Note: This trouble code indicates an internal SKIM fault.
With the DRBIII , read and record the SKIM DTCs and then erase the SKIM DTCs
Perform 5 ignition key cycles, leaving the ignition key on for a minimum of 90 seconds
per cycle.
With the DRBIII , read the SKIM DTCs.
Did the same SKIM DTC return?
Yes → Replace and program the SKREEM in accordance with the
→ Test Complete.
No
Continued
POSSIBLE CAUSES
ACTION
Service Information.
Perform SKREEM VERIFICATION TEST - VER 1A.
300
APPLICABILITY
All
Advertisement
Table of Contents
