Table of Contents
Advertisement
POWER SEATS
MEMORY SWITCH STUCK - DDM —
TEST
3
Turn the ignition off.
Disconnect the Driver Power Seat Switch connector.
Disconnect the Driver Door Module C2 connector.
Inspect the Memory Select Switch MUX circuit for a partial short to ground or to
another circuit in the seat switch harness.
Were there any problems found?
Yes → Repair the Memory Select Switch MUX circuit as necessary.
→ Replace the Driver Door Module.
No
ACTION
Perform POWER SEAT SYSTEM VERIFICATION TEST - VER
1.
Perform BODY VERIFICATION TEST - VER 1.
Continued
878
APPLICABILITY
All
Advertisement
Table of Contents
