Start And Stall Condition - Chrysler Pacifica 2004 Service Manual

Hide thumbs Also See for Pacifica 2004:
Table of Contents

Advertisement

STARTING
Symptom:

*START AND STALL CONDITION

CHECKING DTCS
CHECKING SKIM DTCS
FUEL PRESSURE OUT OF SPECS
TP SENSOR SWEEP
TP SENSOR VOLTAGE GREATER THAN 0.92 VOLTS WITH THROTTLE CLOSED
ECT SENSOR OPERATION
OTHER POSSIBLE CAUSES FOR START & STALL
RESTRICTED FUEL SUPPLY LINE
FUEL PUMP INLET STRAINER PLUGGED
FUEL PUMP MODULE
TEST
1
Turn the ignition on.
With the DRBIII , read DTC's.
Are any DTCs present?
Yes → Refer to the Driveability Category and perform the appropriate
→ Go To 2
No
2
Turn the ignition on.
NOTE: If you are unable to communicate with the SKIM, refer to the
Communication Category and perform the appropriate symptom.
With the DRBIII , read the SKIM codes.
Are there any SKIM DTCs?
Yes → Refer to the Vehicle Theft category and perform the appropriate
→ Go To 3
No
POSSIBLE CAUSES
ACTION
symptom.
Perform POWERTRAIN VERIFICATION TEST VER - 1.
symptom.
Perform POWERTRAIN VERIFICATION TEST VER - 1.
324
APPLICABILITY
All
All

Advertisement

Table of Contents
loading

Table of Contents