Table of Contents
Advertisement
AUDIO
REMOTE RADIO SWITCH STUCK —
TEST
7
Turn the ignition off.
Disconnect the Clockspring C2 harness connector.
Disconnect the BCM C5 harness connector.
Measure the resistance between ground and the Radio Control MUX circuit.
Is the resistance below 5.0 ohms?
Yes → Repair the Radio Control MUX circuit for a short to ground
→ Go To 8
No
8
Turn the ignition off.
Disconnect the Clockspring C2 harness connector.
Disconnect the BCM C4 and C5 harness connectors.
Measure the resistance between the Radio Control MUX circuit and the Radio
Control MUX Return circuit.
Is the resistance below 5.0 ohms?
Yes → Repair the Radio Control MUX circuit for a short to the Radio
→ Go To 9
No
9
If there are no possible causes remaining, view repair.
Repair
ACTION
between the clockspring and the BCM.
Perform BODY VERIFICATION TEST - VER 1.
Control MUX Return circuit between the clockspring and the
BCM.
Perform BODY VERIFICATION TEST - VER 1.
Replace the Body Control Module in accordance with the service
information.
Perform BODY VERIFICATION TEST - VER 1.
Continued
290
APPLICABILITY
All
All
All
Advertisement
Table of Contents
