Chrysler 2004 Town and Country Manual

Chrysler 2004 Town and Country Manual

Chrysler vehicle manual
Table of Contents

Advertisement

Quick Links

SECTION
1

INTRODUCTION

2
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
3
UNDERSTANDING THE FEATURES OF YOUR VEHICLE
4
UNDERSTANDING YOUR INSTRUMENT PANEL
5
STARTING AND OPERATING
6
WHAT TO DO IN EMERGENCIES
7
MAINTAINING YOUR VEHICLE
8
MAINTENANCE SCHEDULES
9
IF YOU NEED CONSUMER ASSISTANCE
10
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 385
INDEX
TABLE OF CONTENTS
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 235
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 289
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 305
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 355
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 375
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153
PAGE
1
2
3
4
5
6
7
8
9
10

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 2004 Town and Country and is the answer not in the manual?

Questions and answers

Summary of Contents for Chrysler 2004 Town and Country

  • Page 1: Introduction

    TABLE OF CONTENTS SECTION ............. 3 INTRODUCTION THINGS TO KNOW BEFORE STARTING YOUR VEHICLE UNDERSTANDING THE FEATURES OF YOUR VEHICLE...
  • Page 3: Table Of Contents

    CONTENTS Introduction ......4 How To Use This Manual ....4 Warnings And Cautions .
  • Page 4: Introduction

    4 INTRODUCTION INTRODUCTION This manual has been prepared with the assistance of service and engineering specialists to acquaint you with the operation and maintenance of your new vehicle. It is supplemented by a Warranty Information Booklet and various customer oriented documents. You are urged to read these publications carefully.
  • Page 5 INTRODUCTION 5...
  • Page 6: Warnings And Cautions

    This number also appears on the Automobile Information NOTE: It is illegal to remove the VIN plate. Disclosure Label affixed to a window on your vehicle.
  • Page 7: Vehicle Modifications / Alterations

    INTRODUCTION 7 VEHICLE MODIFICATIONS / ALTERATIONS WARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to an accident resulting in serious injury or death.
  • Page 9 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE CONTENTS A Word About Your Keys ....12 Ignition Key Removal ....12 Key-In-Ignition Reminder .
  • Page 10 10 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Vehicle Theft Alarm — If Equipped ...27 Sliding Side Door ......28 Power Sliding Door —...
  • Page 11: Periodic Safety Checks You Should Make Outside

    Safety Tips ......73 Exhaust Gas ......73 Safety Checks You Should Make Inside The Vehicle .
  • Page 12: Things To Know Before Starting Your Vehicle 9

    12 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE A WORD ABOUT YOUR KEYS You can insert the double sided keys into the locks with either side up. The dealer that sold you your new vehicle has the key code numbers for your vehicle locks. These numbers can be used to order duplicate keys from your dealer.
  • Page 13: Key-In-Ignition Reminder

    The power window switches, radio, power NOTE: outlets, and removable console (if equipped), will remain active for up to 45 seconds after the ignition switch has been turned off. Opening a vehicle front door will cancel this feature. WARNING! Leaving children in a vehicle unattended is danger- ous for a number of reasons.
  • Page 14 14 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE chip (transponder) embedded into them. Only keys that have been programmed to the vehicle can be used to start and operate the vehicle. The Sentry Key Immobilizer System does not need to be armed or activated.
  • Page 15: Replacement Keys

    All of the keys provided with your new vehicle have been programmed to the vehicle electronics. Replacement Keys NOTE: Only keys that have been programmed to the vehicle electronics can be used to start the vehicle. Once a Sentry Key has been programmed to a vehicle, it can not be programmed to any other vehicle.
  • Page 16: General Information

    16 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 4. Insert a blank Sentry Key into the ignition switch and turn the ignition switch ON within 60 seconds. After 10 seconds a single chime will sound. The Theft Alarm Light will stop flashing, turn on for 3 seconds; then turn off. The new Sentry Key has been programmed.
  • Page 17: Door Locks

    NOTE: • The front courtesy overhead console, door courtesy and liftgate lights do not turn on if the dimmer control is in the interior lights ON position (extreme top position). • The illuminated entry system will not operate if the dimmer control is in the “defeat”...
  • Page 18: Power Door Locks - If Equipped

    18 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! • For personal security and safety in the event of an accident, lock the vehicle doors as you drive as well as when you park and leave the vehicle. • When leaving the vehicle always remove the key from the ignition lock, and lock your vehicle.
  • Page 19 If you press the power door lock switch while the sliding door is open, the sliding door will lock. Automatic Door Locks — If Equipped The doors will lock automatically on vehicles with power door locks if: 1. The transmission is in gear, 2.
  • Page 20: Remote Keyless Entry - If Equipped

    20 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 4. any door is opened (excluding liftgate) and 5. the vehicle speed is 0 mph (0 km/h). The Auto Unlock feature can be enabled or disabled by performing the procedure in the Overhead Console, Customer Programmable Features section.
  • Page 21 Three Button Transmitter Six button transmitters will provide functions that allow the same basic operation as the three button, but may also be used to Open/Close the optional power liftgate, left power sliding door, or right power sliding door. Other options of the system allow you to turn ON/OFF the THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 21 Sound Horn On Lock, Remote Unlock Driver’s Door 1st,...
  • Page 22: To Unlock The Doors And Liftgate

    22 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To unlock the doors and liftgate: Press and release the UNLOCK button on the transmitter once to unlock the driver’s door side of the vehicle, or twice to unlock all doors and liftgate. The illuminated entry system also turns on.
  • Page 23: To Program Transmitters

    headlights and park lights will flash, the horn will pulse on and off and the interior lights will turn on. The panic alarm will stay on for 3 minutes unless you turn it off by pressing the PANIC button a second time or by turning the ignition switch to the ON position.
  • Page 24 24 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To Open/Close Right Power Sliding Door — If Equipped Press the RIGHT button twice within five seconds to open/close the right power sliding door. If the button is pushed while the door is being power closed, the door will reverse to the full open position.
  • Page 25: General Information

    General Information This device complies with part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the following conditions: • This device may not cause harmful interference. • This device must accept any interference received, including interference that may cause undesired op- eration.
  • Page 26: Transmitter Battery Service

    26 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Transmitter Battery Service The recommended replacement battery is one CR2032 battery. NOTE: Do not touch the battery terminals that are on the back housing or the printed circuit board. 1. With the transmitter buttons facing down, use a thin coin to pry the two halves of the transmitter apart.
  • Page 27: Vehicle Theft Alarm - If Equipped

    VEHICLE THEFT ALARM — IF EQUIPPED This system monitors the vehicle doors and ignition switch for unauthorized entry or operation. When the alarm is activated, the system provides both audible and visual signals. The horn will pulse, headlights/park lights will flash, the Vehicle Theft Alarm/Immobilizer light, located in the instrument cluster, will flash, and the vehicle will not start.
  • Page 28: Sliding Side Door

    28 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: • The driver’s door and liftgate key cylinders cannot arm or disarm the system. • Once the alarm is set, and the liftgate button on the keyless entry transmitter is pressed, on a non-power liftgate vehicle, you have a 30 second one time access into the liftgate area.
  • Page 29 To keep your door operating properly, observe the fol- lowing guidelines: • Always open the door smoothly. THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 29 • Avoid high impacts against the door stop when open- ing the door. This is very important when your vehicle is parked on an incline as the door will slide faster in the downhill direction.
  • Page 30: Power Sliding Door - If Equipped

    30 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: The driver’s side sliding door cannot be opened while the fuel door is open. This feature operates only when the sliding door is fully closed prior to opening the fuel door. Power Sliding Door —...
  • Page 31 rear seat passengers. Pressing the switch once will open the power sliding door, once the door is fully open pressing the switch a second time will close the door. If the inside or outside door handles are used while the power sliding door is activated, the power sliding door feature will be canceled and the door must be opened or closed manually.
  • Page 32: Child Protection Door Lock

    32 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • The power sliding door switches will not operate if the vehicle is in gear or the vehicle speed is above 0 mph (0 km/h). • If the power sliding door encounters multiple obstruc- tions within the same cycle, the system will automati- cally stop and must be opened or closed manually.
  • Page 33 When the child lock system is engaged the door can be opened only by using the outside door handle or the switches located on the trim panel just in front of the power sliding door, even though the inside door lock is in the unlocked position.
  • Page 34: Liftgate

    34 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE LIFTGATE NOTE: The key that is used to start the vehicle is also used to lock or unlock the doors and open the liftgate. To open the liftgate, insert the key into the lock and turn to the right.
  • Page 35: Power Liftgate - If Equipped

    NOTE: On vehicles without power locks, the liftgate can only be opened using the vehicle keys. The key must be held in the unlocked position for the liftgate to open. Power Liftgate — If Equipped The power liftgate may be opened manually or by using the button on the remote keyless entry transmitter.
  • Page 36 36 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! During power operation, personal injury or cargo damage may occur. Ensure the liftgate travel path is clear. Make sure the liftgate is closed and latched before driving away. NOTE: • If anything obstructs the power liftgate while it is closing or opening, the liftgate will automatically reverse to the closed or open position, provided it meets sufficient resistance.
  • Page 37 • If the power liftgate encounters multiple obstructions within the same cycle, the system will automatically stop and must be opened or closed manually. WARNING! • Driving with the liftgate open can allow poison- ous exhaust gases into your vehicle. You and your passengers could be injured by these fumes.
  • Page 38: Windows

    38 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WINDOWS Power Vent Windows Switches on the driver’s door trim panel let the driver operate the two vent windows from the driver’s seat. Power Windows You can control either front window using switches on the driver’s door trim panel.
  • Page 39: Occupant Restraints

    Auto Down Feature — If Equipped The driver’s window switch has an auto down feature. Press the window switch past the detent, release, and the window will go down automatically. To open the window part way, press the window switch part way and release it when you want the window to stop.
  • Page 40: Lap/Shoulder Belts

    40 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! In a collision, you and your passengers can suffer much greater injuries if you are not properly buck- led up. You can strike the interior of your vehicle or other passengers, or you can be thrown out of the vehicle.
  • Page 41 WARNING! • It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed. • Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts.
  • Page 42 42 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Lap/Shoulder Belt Operating Instructions 1. Enter the vehicle and close the door. Sit back and adjust the seat. 2. The seat belt latch plate is near the seatback of the front seats and next to your arm in the rear seats. Grasp the latch plate and pull out the belt.
  • Page 43 3. When the belt is long enough to fit, insert the latch plate into the buckle until you hear a “click”. THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 43 WARNING! • A belt that is buckled into the wrong buckle will not protect you properly.
  • Page 44 44 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 4. Position the lap belt across your thighs, below your abdomen. To remove slack in the lap belt portion, pull up on the shoulder belt. To loosen the lap belt if it is too tight, tilt the latch plate and pull on the lap belt.
  • Page 45 6. To release the belt, push the red button on the buckle. The belt will automatically retract to its stowed position. If necessary, slide the latch plate down the webbing to allow the belt to retract fully. WARNING! A frayed or torn belt could rip apart in a collision and leave you with no protection.
  • Page 46: Lap/Shoulder Belt Untwisting Procedure

    46 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE As a guide, if you are shorter than average, you will prefer a lower position, and if you are taller than average, you’ll prefer a higher position. When you release the anchorage, try to move it up or down to make sure that it is locked in position.
  • Page 47 2. At about 6 to 12 inches (15 to 30 cm) above the latch plate, grasp and twist the belt webbing 180° to create a fold that begins immediately above the latch plate. 3. Slide the latch plate upward over the folded webbing. The folded webbing must enter the slot at the top of the latch plate.
  • Page 48: Center Lap Belts

    48 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Center Lap Belts The center seating positions have a lap belt only. To fasten the lap belt, slide the latch plate into the buckle until you hear a “click”. To lengthen the lap belt, tilt the latch plate and pull.
  • Page 49: Seat Belts And Pregnant Women

    NOTE: These devices are not a substitute for proper seat belt placement by the occupant. The seat belt still must be worn snugly and positioned properly. The pretensioners are triggered by the front airbag con- trol module (see Front Airbag Section). Like the front airbags, the pretensioners are single use items.
  • Page 50: Driver And Front Passenger Supplemental

    50 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Driver and Front Passenger Supplemental Restraint System - Airbag This vehicle has airbags for both the driver and front passenger as a supplement to the seat belt restraint systems. The driver’s front airbag is mounted in the center of the steering wheel.
  • Page 51 If the vehicle is equipped with side airbags, they are located inside the driver and front passenger seatbacks, and their seatcovers are labeled SRS AIRBAG. THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 51 WARNING! • Do not put anything on or around the airbag covers or attempt to manually open them.
  • Page 52 52 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Airbags inflate in moderate to high speed impacts. Along with seat belts and pretensioners, front airbags work with the instrument panel knee bolsters to provide improved protection for the driver and front passenger. Side airbags also work with seat belts to improve occupant protection.
  • Page 53 2. All occupants should wear their lap and shoulder belts properly. 3. The driver and front passenger seats should be moved back as far as practical to allow the front airbags room to inflate. 4. If your vehicle has side airbags, do not lean against the door, airbags will inflate forcefully into the space between you and the door.
  • Page 54 54 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The Front Airbag System consists of the following: • Front Airbag Control Module (with integrated side impact sensor - if equipped) • AIRBAG Readiness Light • Driver Airbag • Front Passenger Airbag •...
  • Page 55 The front airbag control module sends a message to the instrument cluster to turn on the AIRBAG light in the instrument panel for 6 to 8 seconds when the ignition switch is first turned ON, then turns the light off. If the front control module detects a malfunction in any part of the system, the airbag light will turn on either momen- tarily or continuously.
  • Page 56: Side Airbags Supplemental Restraint System (Srs) - If Equipped

    56 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Side Airbags Supplemental Restraint System (SRS) — If Equipped The Side Airbag System, if equipped, consists of the following: • AIRBAG Readiness Light (shared with the front airbag system) • Side Airbag in the driver’s seat •...
  • Page 57 If An Airbag Deployment Occurs The airbag systems are designed to deploy when the airbag control modules detect a moderate-to-severe col- lision, to help restrain the driver and front passenger, and then immediately deflate. NOTE: A collision that is not severe enough to need airbag protection will not activate the system.
  • Page 58 58 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! Deployed airbags and seat belt pretensioners cannot protect you in another collision. Have the airbags and seat belt pretensioners replaced by an autho- rized dealer as soon as possible. Enhanced Accident Response If the airbags and seat belt pertensioners deploy after an impact and the electrical system remains functional, vehicles equipped with power door locks will unlock...
  • Page 59: Daimlerchrysler Corporation Integrated Child Seat - If Equipped

    Airbag Light You will want to have the airbags ready to inflate for your protection in a collision. While the airbag system is designed to be maintenance free, if any of the following occurs, have an authorized dealer service the system immediately.
  • Page 60 60 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Children 12 years and under should ride properly buck- led up in a rear seat. According to crash statistics, children are safer when properly restrained in the rear seats, rather than in the front. WARNING! In a collision, an unrestrained child, even a tiny baby, can become a missile inside the vehicle.
  • Page 61 used either rearward-facing or forward-facing in the vehicle. Convertible child seats often have a higher weight limit in the rearward-facing direction than infant carriers do, so they can be used rearward-facing by children who weigh more than 20 lbs (9 kg) but are less than one year old.
  • Page 62 62 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! • Improper installation can lead to failure of an infant or child restraint. It could come loose in a collision. The child could be badly injured or killed. Follow the manufacturer’s directions ex- actly when installing an infant or child restraint.
  • Page 63 • In the rear seat, you may have trouble tightening the lap/shoulder belt on the child restraint because the buckle or latch plate is too close to the belt path opening on the restraint. Disconnect the latch plate from the buckle and twist the short buckle end of the belt several times to shorten it.
  • Page 64 64 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Lower Anchors and Tether for CHildren (LATCH) Each vehicle, except commercial cargo vehicles, is equipped with the child restraint anchorage system called LATCH, which stands for Lower Anchors and Tether for CHildren. Two LATCH child restraint anchor- age systems are installed on all second-row seats.
  • Page 65 When using the tether anchorages in the outboard seat- ing positions, ensure that the strap is routed over the top of the seatback and under the head restraint between the head restraint posts. When the tether anchorage is used in the center seating position, the strap should be posi- tioned straight over the top of the seatback.
  • Page 66 66 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Fleet vehicles equipped with the LATCH system on the 3-passenger bench seat must have the seat adjusted to the full rear position on the tracks when the LATCH system is used. Also, when using the LATCH system, be sure the seatback is two clicks rear of its full upright position.
  • Page 67 We urge that you carefully follow the directions of the manufacturer when installing your child restraint. Many, but not all, restraint systems will be equipped with separate straps on each side, with each having a hook or connector and a means for adjusting the tension in the strap.
  • Page 68: Rear Seat Delete Feature (Commercial Vehicles Only) - If Equipped

    68 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Check belt fit periodically. A child’s squirming or slouching can move the belt out of position. • If the shoulder belt contacts the face or neck, move the child closer to the center of the vehicle. If this doesn’t help, move the child to the center rear seating position and use the lap belt.
  • Page 69: Restraining Infants And Small Children With Seat

    WARNING! Rear Facing Infant restraints must never be secured in the passenger seat of a vehicle with a passenger airbag. In an accident a passenger airbag may deploy causing severe injury or death to infants riding in rear facing infant restraints. Restraining Infants and Small Children with Seat Delete Feature (Commercial Vehicles Only) There are different sizes and types of restraints for...
  • Page 70 70 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE with the seat adjusted to the rear most position. Never allow children to slide the shoulder belt behind them or under their arm. Tether Installation For Commercial Vehicles With Rear Seat Delete To secure the child restraint upper tether strap to the vehicle, follow the instructions shown: 1.
  • Page 71 2. Extend the child restraint tether anchor forward to- wards the front passenger seat. 3. Follow the child restraint manufacturer’s directions for proper use of connecting the child restraint to the extended tether strap. THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 71 4.
  • Page 72: Engine Break-In Recommendations

    72 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 6. Using the hook attached to the child restraint tether strap, attach the child restraint tether strap to the metal ring on the vehicle tether anchor. 7. Following the child seat manufacturer’s instructions, tighten the child restraint tether strap.
  • Page 73: Safety Tips

    While cruising, brief full-throttle acceleration, within the limits of local traffic laws, contributes to a good break-in. Wide open throttle acceleration in low gear can be detrimental and should be avoided. The engine oil installed in the engine at the factory is a high quality energy conserving type lubricant.
  • Page 74: Safety Checks You Should Make Inside The Vehicle

    74 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! If you are required to drive with the liftgate open, make sure that all windows are closed, and the climate control blower switch is set at high speed. DO NOT use the recirculation mode. Safety Checks You Should Make Inside The Vehicle Seat Belts...
  • Page 75 Lights Have someone observe the operation of exterior lights while you work the controls. Check turn signal and high beam indicator lights on the instrument panel. THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 75 Fluid Leaks Check area under vehicle after overnight parking for fuel, engine coolant, oil or other fluid leaks.
  • Page 77: Understanding The Features Of Your Vehicle

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE CONTENTS Mirrors .......81 Inside Day/Night Mirror ....81 Automatic Dimming Mirror —...
  • Page 78 78 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Manual Reclining Seats — If Equipped ..88 Manual Lumbar — If Equipped ... .89 Middle Quad Fold & Tumble Seating ..90 Middle Quad Fold &...
  • Page 79 Front Fog Lights — If Equipped ... 110 Multifunction Lever ..... 110 Turn Signals .
  • Page 80 80 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Garage Door Opener — If Equipped ..129 Programming Homelink ....130 Canadian Programming/Gate Programming .
  • Page 81: Mirrors

    MIRRORS Inside Day/Night Mirror Adjust the mirror to center on the view through the rear window. A two point pivot system allows for horizontal and vertical adjustment of the mirror. UNDERSTANDING THE FEATURES OF YOUR VEHICLE 81 Annoying headlight glare can be reduced by moving the small control under the mirror to the night position (toward rear of vehicle).
  • Page 82: Understanding The Features Of Your Vehicle

    82 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Automatic Dimming Mirror — If equipped If the switch is in the “Auto” position the mirror will automatically adjust for annoying headlight glare from vehicles behind you. You can turn the feature on or off by pressing the button at the base of the mirror.
  • Page 83: Outside Mirror - Driver's Side

    Outside Mirror — Driver’s Side Adjust the outside mirror to center on the adjacent lane of traffic, with a slight overlap of the view obtained on the inside mirror. Outside Mirror — Passenger’s Side Adjust the convex outside mirror so you can just see the side of your vehicle in the portion of the mirror closest to the vehicle.
  • Page 84: Power Remote-Control Mirrors

    84 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Power Remote-Control Mirrors Use the mirror select switch, located on the instrument panel to the left of the steering column, to adjust the view obtained in the outside mirrors. Press the rocker switch to the L or R for Left or Right mirror selection.
  • Page 85: Seats

    SEATS Manual Front Seat Adjuster The adjusting bar is located under the front of the seat. Pull the bar up and move the seat to the desired position. Release the bar to lock the seat into position. Using body pressure, move forward and rearward on the seat to be sure the seat adjusters have latched.
  • Page 86: 8-Way Driver's Power Seat - If Equipped

    86 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 8–Way Driver’s Power Seat — If Equipped The driver’s power seat switches are located on the outboard side of the seat. The front switch controls up/down, forward/rearward, and tilt adjustment. The rear switch controls the seatback recline adjustment. 4–Way Passenger’s Power Seat —...
  • Page 87: Adjustable Head Restraints - If Equipped

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE 87 Adjustable Head Restraints — If Equipped Head restraints can reduce the risk of whiplash injury in the event of impact from the rear. Pull up or push down on the head restraint so that the upper edge is as high as practical.
  • Page 88: Heated Seats - If Equipped

    88 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Heated Seats — If Equipped This feature heats the front driver and passenger seats. The controls for the heated seats are located on the instrument panel above the radio. You may choose LOW, HIGH or No Heat.
  • Page 89: Manual Lumbar - If Equipped

    WARNING! Do not ride with the seatback reclined so that the shoulder belt is no longer resting against your chest. In a collision you could slide under the seat belt and be seriously or fatally injured. Use the recliner only when the vehicle is parked.
  • Page 90: Middle Quad Fold & Tumble Seating

    90 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Middle Quad Fold & Tumble Seating The passenger’s and driver’s side middle quad seats can be tilted forward for easy access to the third seat or rear cargo area. To tilt the seat, pull up on the release handle and tilt the seat fully forward.
  • Page 91 3. Pull up on the seatback release lever located on the outboard side of the seat and fold the seatback down. If the head restraint contacts the rear of the front seat, move the front seat forward on its tracks. UNDERSTANDING THE FEATURES OF YOUR VEHICLE 91 4.
  • Page 92 92 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 5. Pull the release bar located at the bottom front edge of the seat to disengage the front attachments. 6. The seat assembly can now be removed from the vehicle and moved on its Easy Out Rollers. To reinstall the seat, remove any obstructions from the floor in front of the seat and ensure the head restraint is in its full downward position.
  • Page 93: 50/50 Fold & Tumble Rear Seat Removal

    50/50 Fold & Tumble Rear Seat Removal 1. Lower the head restraint and pull up on release lever “1” to fold the seatback down. UNDERSTANDING THE FEATURES OF YOUR VEHICLE 93 2. Pull up on release lever “2” and tumble the seat fully forward.
  • Page 94 94 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 3. Pull the release strap “3” located at the bottom of the seat to disengage the front attachments. 4. The seat assembly can now be removed from the vehicle and moved on its Easy Out Rollers. To reinstall the 50/50 rear seat, lower the head restraint to the full down position, tilt the seat forward and engage the front floor attachments, then tilt the seat rearward to...
  • Page 95: Passenger Bench Seats

    3 – Passenger Bench Seats Release levers are located on the rear leg assemblies, near the floor. To remove the seat, squeeze each release handle and rotate downwards to deploy the wheels. A lock indicator button pops up when the seat is unlocked. The seat assembly can now be removed from the vehicle and moved on its Easy Out Rollers.
  • Page 96: Plastic Grocery Bag Retainer

    96 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Plastic Grocery Bag Retainer Retainer hooks which will hold plastic grocery bag handles are built into the seatbacks of all rear seats and some front seats. The floor supports the partial weight of the bagged goods.
  • Page 97: Rear Seat Descriptions

    Rear Seat Descriptions 7 Passenger Model — 2– passenger bucket seats in the second position and 3– passenger bench seat or 50/50 bench seat in the third position. All rear seats are remov- able. Rear Bench Seating Flexibility The 3– passenger bench seat may be adjusted to any of 3 positions on its tracks while installed in the vehicle.
  • Page 98 98 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 3. Additional Storage— The 2nd and 3rd row seats installed. The 3rd row bench seat is in the full forward position on the tracks and one or both of the rear seatbacks are folded down. 4.
  • Page 99: Rear Quad And 50/50 Seating Flexibility

    Rear Quad and 50/50 Seating Flexibility The seats may be used with either or both seatbacks folded forward for additional storage space, or with either or both seats removed from the vehicle. Both 50/50 seats may also be moved to the 2nd row seating position when the middle quad seats are removed.
  • Page 100 100 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 3. Additional Storage— The 2nd row seats are installed in the middle seating position. Either or both of the rear seats are removed from the vehicle. 4. Auxiliary Seating— The 2nd row seats are removed from the vehicle. Then the third row seats can be installed in either the rear or middle seat position.
  • Page 101: Driver Memory System - If Equipped

    WARNING! • Not all head restraints in this vehicle are the same. Head restraints from one seating position should not be removed and installed in any other seating posi- tion. In a collision, serious injury or death may result if the proper head restraint is not installed on each seat.
  • Page 102: Setting Memory Positions And Linking Remote Keyless Entry Transmitter To Memory

    102 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Your vehicle may have been delivered with two Remote Keyless Entry transmitters. One or both transmitters can be linked to either memory position. The memory system can accommodate up to four transmitters, each one linked to either of the two memory positions.
  • Page 103: Memory Position Recall

    9. Press and release the LOCK button on one of the transmitters. A chime will sound signaling to you that the transmitter has been successfully linked to memory. 10. Insert the ignition key and turn the ignition switch to the ON position. 11.
  • Page 104: To Disable A Transmitter Linked To Memory

    104 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To Disable A Transmitter Linked to Memory 1. Turn the ignition switch to the OFF position and remove the key. 2. Press and release memory button number 1. The system will recall any memory settings stored in position 1.
  • Page 105: To Open And Close The Hood

    TO OPEN AND CLOSE THE HOOD To open the hood, two latches must be released. First pull the hood release lever located under the left side of the instrument panel. Next, push to the left the safety catch located under the front edge of the hood, near the center.
  • Page 106: Lights

    106 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! If the hood is not fully latched, it could fly up when the vehicle is moving and block your forward vision. You could have a collision. Be sure all hood latches are fully latched before driving. LIGHTS All of the lights, except the hazard warning lights, are controlled by switches to the left of the steering column...
  • Page 107: Park Lights

    by pressing the lens. The lights will remain on until the lens is pressed a second time, so be sure they have been turned off before leaving the vehicle. The interior lights will automatically turn off in about 15 minutes if any of the following occur. •...
  • Page 108: Automatic Headlights - If Equipped

    108 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Dome Light Position Rotate the dimmer control com- pletely upward to the second de- tent (extreme top position) to turn on the interior lights, except the front reading/courtesy lights. The interior lights will remain on when the dimmer control is in this position.
  • Page 109: Daytime Running Lights (Canada/Fleet Vehicles Only)

    ON for up to 90 seconds after you turn the ignition switch OFF. To turn the Automatic System OFF, turn the headlight switch clockwise to the OFF position. NOTE: The engine must be running before the head- lights will come ON in the Automatic mode. Daytime Running Lights (Canada/Fleet Vehicles Only) The Daytime Running Lights will come on whenever the...
  • Page 110: Front Fog Lights - If Equipped

    110 UNDERSTANDING THE FEATURES OF YOUR VEHICLE headlights within 45 seconds. The 90 second delay inter- val begins when headlight switch is turned off. If the headlights or park lights are turned back on or the ignition switch is turned on, the delay will be cancelled. If the headlights are turned off before the ignition, they will turn off in the normal manner.
  • Page 111: Headlight Low/High Beam Selector Switch

    Turn Signal Warning If the vehicle electronics sense that the vehicle has traveled at over 18 mph (29 km/h) for about one mile with the turn signals on, a chime will sound to alert the driver. UNDERSTANDING THE FEATURES OF YOUR VEHICLE 111 Headlight Low/High Beam Selector Switch Pull the multifunction lever toward the steering wheel to switch the headlights between HIGH and LOW beam.
  • Page 112 112 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: Always remove any build-up of snow that prevents the windshield wiper blades from returning to the OFF position. If the windshield wiper switch is turned OFF and the blades cannot return to the OFF position, damage to the wiper motor may occur.
  • Page 113 WARNING! Sudden loss of visibility through the windshield could lead to an accident. You might not see other vehicles or other obstacles. To avoid sudden icing of the windshield during freezing weather, warm the windshield with defroster before and during wind- shield washer use.
  • Page 114: Tilt Steering Column - If Equipped

    114 UNDERSTANDING THE FEATURES OF YOUR VEHICLE TILT STEERING COLUMN — IF EQUIPPED To tilt the column, pull the small lever, located behind the turn signal control, toward you and move the wheel up or down, as desired. Release the lever to lock the wheel firmly in place.
  • Page 115: Traction Control Switch - If Equipped

    TRACTION CONTROL SWITCH — IF EQUIPPED The TRAC indicator, located below the instrument cluster odometer, will light up when the Traction Control is in use. To turn the system OFF, press the TRAC OFF switch located on the steering column, until the TRAC OFF indicator below the instrument cluster odometer lights UNDERSTANDING THE FEATURES OF YOUR VEHICLE 115 To turn the system back ON, press the switch a second...
  • Page 116: Adjustable Pedals - If Equipped

    116 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ADJUSTABLE PEDALS — IF EQUIPPED This feature allows both the brake and accelerator pedals to move toward or away from the driver to provide improved position with the steering wheel. The adjust- able pedal system is designed to allow a greater range of driver comfort for steering wheel tilt and seat position.
  • Page 117: Electronic Speed Control - If Equipped

    • The pedals cannot be adjusted when the vehicle is in R (Reverse) or when the Speed Control System is ON. The following messages will be displayed on vehicles equipped with the Electronic Vehicle Information Sys- tem (EVIC) if the pedals are attempted to be adjusted when the system is locked out (“Adjustable Pedal Disabled —...
  • Page 118: To Activate

    118 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To Activate: Push the “ON/OFF” button once and the CRUISE indi- cator located below the instrument cluster odometer will illuminate showing the electronic speed control system is on. To turn the system OFF, push the “ON/OFF” button again and the system and indicator will turn off.
  • Page 119: To Vary The Speed Setting

    To Vary the Speed Setting: When the speed control is set, speed can be increased by pressing and holding the “RESUME/ACCEL” button. When the button is released, a new set speed will be established. Tapping the “RESUME/ACCEL” button once will result in a 2 mph (3 km/h) speed increase.
  • Page 120: Overhead Console - If Equipped

    120 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! Speed Control can be dangerous where the system can’t maintain a constant speed. Your vehicle could go too fast for the conditions, and you could lose control. An accident could be the result. Don’t use Speed Control in heavy traffic or on roads that are winding, icy, snow-covered, or slippery.
  • Page 121: Sunglass Storage

    The lights also turn on when a front door, a sliding door or the liftgate is opened. If your vehicle is equipped with Remote Keyless Entry, the lights will also turn on when the unlock button on the transmitter is pressed. The area around the instrument panel cupholders is also illuminated from a light in the overhead console.
  • Page 122 122 UNDERSTANDING THE FEATURES OF YOUR VEHICLE turns in an area free from large metal or metallic objects, the “CAL” symbol will turn off and the compass will function normally. Manual Compass Calibration If the compass appears erratic and the “CAL” symbol does not appear, you must put the compass into the Calibration Mode manually.
  • Page 123 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 123 To set the variance: Turn the ignition switch ON and set the display to Comp/Temp. On vehicles equipped with a Compass/Mini Trip Computer press the RESET button for approximately 5 seconds. On vehicles equipped with Compass/Temp press and hold the C/T and US/M buttons for 5 seconds.
  • Page 124: Mini-Trip Computer

    124 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Mini-Trip Computer This displays information on the following: • Average Fuel Economy (ECO AVG) Shows the average fuel economy since the last reset. • Distance To Empty (DTE) Shows the estimated distance that can be travelled with the fuel remaining in the tank.
  • Page 125: Electronic Vehicle Information Center (Evic) - If Equipped

    Electronic Vehicle Information Center (EVIC) — If Equipped The Electronic Vehicle Information Center, when the appropriate conditions exist, displays the following WARNING messages and symbols. Each message is accompanied by a single chime: • TURN SIGNALS ON (with graphic) • PERFORM SERVICE •...
  • Page 126: Customer Programmable Features - If Equipped

    126 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: Tire pressure menu items are available only on vehicles equipped with the Tire Pressure Monitor Sys- tem. Customer Programmable Features — If Equipped Press the “MENU” button until one of the display choices following appears: Language When in this display you may select one of five lan-...
  • Page 127 the Tire Pressure Monitor system and the training routine is not performed, training will be cancelled after one minute or the next time you cycle the ignition key. See your authorized dealer for service and retraining of the system. Use Factory Settings If “Yes”...
  • Page 128 128 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Remote Linked To Memory (Available with Memory Seat and Pedals Only) When this feature is selected, pressing the Unlock button on any Remote Keyless Entry transmitter already linked to memory will return the driver’s seat, driver’s outside mirror, adjustable brake and accelerator pedals, and radio station presets to their memory set positions.
  • Page 129: Garage Door Opener - If Equipped

    Headlamp Delay When this feature is selected the driver can choose, when exiting the vehicle, to have the headlamps remain on for 30, 60, or 90 seconds, or not remain on. Pressing the “STEP” button when in this display will select 30, 60, 90, or “OFF.”...
  • Page 130: Programming Homelink

    130 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! A moving garage door can cause injury to people and pets in the path of the door. People or pets could be seriously or fatally injured. Only use this transceiver with a garage door opener that has a “stop and reverse”...
  • Page 131 WARNING! Vehicle exhaust contains carbon monoxide, a danger- ous gas. Do not run the vehicle’s exhaust while training the transceiver. Exhaust gas can cause seri- ous injury or death. UNDERSTANDING THE FEATURES OF YOUR VEHICLE 131 WARNING! Your motorized door or gate will open and close while you are training the Universal Transceiver.
  • Page 132 132 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: Some gate operators and garage door openers may require you to replace this Programming Step 3 with procedures noted in the Gate Operator/Canadian Pro- gramming section. 4. The HomeLink indicator light will flash slowly and then rapidly after HomeLink successfully receives the frequency signal from the hand-held transmitter.
  • Page 133: Canadian Programming/Gate Programming

    and, depending on the brand of the garage door opener (or other rolling code equipped device), repeat this sequence a third time to complete the programming. HomeLink should now activate your rolling code equipped device. NOTE: To program the remaining two HomeLink but- tons, begin with Programming step two.
  • Page 134: Erasing Homelink Buttons

    134 UNDERSTANDING THE FEATURES OF YOUR VEHICLE etc.). For convenience, the hand-held transmitter of the device may also be used at any time. In the event that there are still programming difficulties or questions, contact HomeLink at: www.homelink.com or 1-800-355- 3515.
  • Page 135: Power Sunroof - If Equipped

    This device complies with part 15 of FCC rules and with RSS-210 of Industry Canada. Operation is subject to the following conditions: • This device may not cause harmful interference. • This device must accept any interference that may be received including interference that may cause undes- ired operation.
  • Page 136: Express Open Feature

    136 UNDERSTANDING THE FEATURES OF YOUR VEHICLE switch rearward will activate the Express Open Feature, causing the sunroof to open automatically. Press and hold the button located to the right of the sunroof switch, to open the vent. The sunroof can be stopped at any position between closed and full vent.
  • Page 137: Wind Buffeting

    WARNING! In an accident, there is a greater risk of being thrown from a vehicle with an open sunroof. You could also be seriously injured or killed. Always fasten your seat belt properly and make sure all passengers are properly secured too. Do not allow small children to operate the sunroof.
  • Page 138: Electrical Power Outlets - If Equipped

    138 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ELECTRICAL POWER OUTLETS — IF EQUIPPED To the left of the instrument panel cup holder are two 12 volt power outlets. The upper outlet is controlled by the ignition switch and the lower outlet is connected directly to the battery.
  • Page 139: Electrical Outlet Use With Engine Off

    The lower outlet is protected by an automatic reset circuit breaker. The automatic circuit breaker restores power when the overload is removed. The circuit breaker also supplies power to the outlet in the removable floor console, when in the front position. Refer to section 3 “Removable Floor Console”...
  • Page 140: Convenience Tray Drawer And Cup Holders

    140 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CONVENIENCE TRAY DRAWER AND CUP HOLDERS Instrument Panel Cup Holders The instrument panel cupholders are located in a pull out drawer just below the climate controls. When the drawer is pulled out firmly, the arms of the cupholders will spring out.
  • Page 141: Rear Cupholders

    With the optional dealer installed Smoker’s package, a removable ash receiver is inserted into the convenience tray location. To install the ash receiver, slide the forward edge into the convenience tray opening and push down to lock it into position. For cleaning of the ash receiver, its removal is accomplished by inserting the end of a key in the pry slot that is molded into the rear edge of the ash receiver and then twisting the key slightly.
  • Page 142: Storage

    142 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • The quad seat cupholders are designed to break away if stepped on. To return the cupholder to its normal position, simply push the cupholder up to snap it into place. • The floor mat must be in position for optimum cup- holder operation.
  • Page 143 breaker and is powered directly from the battery, items plugged into this outlet may discharge the battery and/or prevent engine starting. To remove the console use the following procedure: 1. Open the rear lid and remove the storage tray. UNDERSTANDING THE FEATURES OF YOUR VEHICLE 143 2.
  • Page 144 144 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To reinstall the console, remove the rubber mat and relocate to the alternate floor tray, slide the console forward to engage the front of the console into the floor tray. Rapidly push down on the rear of the console with enough force to engage the latch, you should hear the latch “snap”...
  • Page 145: Rear Compartment Storage Bins

    CAUTION! • Many accessories that can be plugged in draw power from the vehicle’s battery, even when not in use (i.e. cellular phones, etc.). Eventually, if plugged in long enough, the vehicle’s battery will discharge sufficiently to degrade battery life and/or prevent engine starting.
  • Page 146: Cargo Organizer - If Equipped

    146 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The liftgate sill plate has a raised line with the statement “Load To This Line”. This line indicates how far rearward cargo can be placed without interfering with liftgate closing. Cargo Organizer — If Equipped Long wheel base vehicle with rear air conditioning may be equipped with a cargo organizer that mounts on the floor behind the rear seat.
  • Page 147 1. To raise the cargo organizer pull up on the handle and pull towards the rear of the vehicle. 2. Place the rear corners of the cargo organizer into the supports located on the rear trim panel. Press down on the back of the cargo organizer to lock it into place.
  • Page 148 148 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! Do not load objects over 100 lbs (45 kg) in the lower position. Failure to follow this could cause damage to the cargo organizer. To Open Storage Compartments 1. Pull up on the center opening of the cargo organizer. 2.
  • Page 149: Roof Luggage Rack - If Equipped

    Cargo Organizer removal Unscrew the two plastic fasteners located on the floor of the rear of the cargo area and remove the cargo organizer from the vehicle. NOTE: The cargo organizer must be removed to take out the third row seat. UNDERSTANDING THE FEATURES OF YOUR VEHICLE 149 ROOF LUGGAGE RACK —...
  • Page 150 150 UNDERSTANDING THE FEATURES OF YOUR VEHICLE capacity of the vehicle. Be sure the total load of cargo inside the vehicle plus that on the external rack does not exceed the maximum vehicle load capacity. To move the cross bars, press the upper edge of each cross bar button pass the detent, then move the cross bar to the desired position.
  • Page 151 CAUTION! • To avoid damage to the roof rack and vehicle, do not exceed the maximum roof rack load capacity of 150 lbs (68 kg). Always distribute heavy loads as evenly as possible and secure the load appro- priately. • Long loads which extend over the windshield, such as wood panels or surfboards, or loads with large frontal area should be secured to both the front and rear of the vehicle.
  • Page 152: Load Leveling System

    152 UNDERSTANDING THE FEATURES OF YOUR VEHICLE LOAD LEVELING SYSTEM The automatic load leveling system will provide a level riding vehicle under most passenger and cargo loading conditions. A hydraulic pump contained within the shock absorbers raises the rear of the vehicle to the correct height. It takes approximately 1 mile (1.6 km) of driving for the leveling to complete depending on road surface conditions.
  • Page 153: Understanding Your Instrument Panel

    UNDERSTANDING YOUR INSTRUMENT PANEL CONTENTS Instruments And Controls ....158 Instrument Cluster With Tach ....159 Premium Instrument Cluster .
  • Page 154 154 UNDERSTANDING YOUR INSTRUMENT PANEL Power Switch, Volume Control ... . 171 Seek Button (Radio Mode) ....171 Tuning .
  • Page 155 Program Button 4 (Random Play) ..178 Mode ......179 Tape CD Button .
  • Page 156 156 UNDERSTANDING YOUR INSTRUMENT PANEL Time Button ......197 Changing Modes ..... . 197 Removing Discs From The CD Changer .
  • Page 157 Infrared Three-Zone Automatic Temperature Control — If Equipped ....219 Rear Window Features ....230 Intermittent Rear Wiper Operation —...
  • Page 158: Understanding Your Instrument Panel

    158 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENTS AND CONTROLS...
  • Page 159: Instrument Cluster With Tach

    UNDERSTANDING YOUR INSTRUMENT PANEL 159 INSTRUMENT CLUSTER WITH TACH...
  • Page 160: Premium Instrument Cluster

    160 UNDERSTANDING YOUR INSTRUMENT PANEL PREMIUM INSTRUMENT CLUSTER...
  • Page 161: Instrument Cluster Descriptions

    INSTRUMENT CLUSTER DESCRIPTIONS 1. Fuel Gauge The pointer shows the level of fuel in the fuel tank when the ignition switch is in the ON position. 2. Low Fuel Light When the fuel level reaches approximately 3.0 gallons (11.0 liters) this light will turn on and remain on until fuel is added.
  • Page 162 162 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: The light may flash momentarily during sharp cornering maneuvers which change fluid level condi- tions. The vehicle should have service performed. If brake failure is indicated, immediate repair is neces- sary. WARNING! Driving a vehicle with the brake light on is danger- ous.
  • Page 163 8. Anti-Lock Light This light monitors the Anti-Lock Brake System. The light will turn on when the ignition switch is turned to the ON position and may stay on for as long as four seconds. If the ABS light remains on or turns on while driving, it indicates that the Anti-Lock portion of the brake system is not functioning and that service is required.
  • Page 164 164 UNDERSTANDING YOUR INSTRUMENT PANEL 12. Engine Temperature Warning Light This light warns of an overheated engine condi- tion. If the engine is critically hot, a continuous chime will sound for 4 minutes. After the chime turns off, the engine will still be critically hot until the light turns off.
  • Page 165 WARNING! A hot engine cooling system is dangerous. You or others could be badly burned by steam or boiling coolant. You may want to call a service center if your vehicle overheats. If you decide to look under the hood yourself, see Section 7 of this manual. Follow the warnings under the Cooling System Pressure Cap paragraph.
  • Page 166 166 UNDERSTANDING YOUR INSTRUMENT PANEL engine start. The vehicle should be serviced if the light stays on through several of your typical driving cycles. In most situations the vehicle will drive normally and will not require towing. The Malfunction Indicator Light flashes to alert to serious conditions that could lead to immediate loss of power or severe catalytic converter damage.
  • Page 167 20. Odometer/Trip Odometer The odometer shows the total distance the vehicle has been driven. U.S. federal regulations require that upon transfer of vehicle ownership, the seller certify to the purchaser the correct mileage that the vehicle has been driven. There- fore, if the odometer reading is changed during repair or replacement, be sure to keep a record of the reading before and after the service so that the correct mileage can...
  • Page 168: Information Center - If Equipped

    168 UNDERSTANDING YOUR INSTRUMENT PANEL When the tire pressure monitoring system warning light is lit, one or more of your tires is significantly underin- flated. You should stop and check your tires as soon as possible, and inflate them to the proper pressure as indicated on the tire and loading information placard.
  • Page 169: High Beam Light

    will sound to alert you to turn the signals off. If either indicator flashes at a rapid rate, check for a defective outside light bulb. High Beam Light This light shows that the headlights are on high beam. Pull the turn signal lever towards the steering wheel to switch the headlights from high or low beam.
  • Page 170: Two Types Of Signals

    170 UNDERSTANDING YOUR INSTRUMENT PANEL Two Types of Signals There are two basic types of radio signals... AM or Amplitude Modulation, in which the transmitted sound causes the amplitude, or height, of the radio waves to vary... and FM or Frequency Modulation, in which the frequency of the wave is varied to carry the sound.
  • Page 171: Sales Code Raz-Am/ Fm Stereo Radio With Cassette Tape Player, Cd Player And Cd Changer Controls - If Equipped

    SALES CODE RAZ—AM/ FM STEREO RADIO WITH CASSETTE TAPE PLAYER, CD PLAYER AND CD CHANGER CONTROLS — IF EQUIPPED Operating Instructions — Radio NOTE: Power to operate the radio is controlled by the ignition switch. It must be in the ON or ACC position to operate the radio.
  • Page 172: Pty (Program Type) Button

    172 UNDERSTANDING YOUR INSTRUMENT PANEL PTY (Program Type) Button Pressing this button once will turn on the PTY mode for 5 seconds. If no action is taken during the 5 second time out the PTY icon will turn off. Pressing the PTY button within 5 seconds will allow the program format type to be selected.
  • Page 173: Balance

    By pressing the SEEK button when the PTY icon is displayed, the radio will be tuned to the next frequency station with the same selected PTY name. The PTY function only operates when in the FM mode. The radio display will flash “SEEK” and the selected PTY program type when searching for the next PTY station.
  • Page 174: Am/Fm Selection

    174 UNDERSTANDING YOUR INSTRUMENT PANEL AM/FM Selection Press the AM/FM button to change from AM to FM. The operating mode will be displayed next to the station frequency. The display will show ST when a stereo station is received. Scan Button Pressing the SCAN button causes the tuner to search for the next station, in either AM or FM, pausing for 5 seconds at each listenable station before continuing to the...
  • Page 175: To Change From Clock To Radio Mode

    To Change From Clock To Radio Mode Press the Time button to change the display between radio frequency and time. Operating Instructions — Tape Player Insert the cassette with the exposed tape side toward the right and the mechanical action of the player will gently pull the cassette into the play position.
  • Page 176: Tape Eject

    176 UNDERSTANDING YOUR INSTRUMENT PANEL Tape Eject Press the EJT Tape button and the cassette will disengage and eject from the radio. Scan Button Press this button to play 10 seconds of each selection. Press the scan button a second time to cancel the feature. Changing Tape Direction If you wish to change the direction of tape travel (side being played), press the PTY button.
  • Page 177: Operating Instructions - Cd Player

    Operating Instructions — CD Player NOTE: The ignition switch must be in the ON or ACC position and the volume control ON before the CD player will operate. CAUTION! This CD player will accept 4 ⁄ inch (12 cm) discs only.
  • Page 178: Seek Button

    178 UNDERSTANDING YOUR INSTRUMENT PANEL Seek Button Press the top of the SEEK button for the next selection on the CD. Press the bottom of the button to return to the beginning of the current selection, or return to the beginning of the previous selection if the CD is within the first 10 seconds of the current selection.
  • Page 179: Mode

    MODE Press the MODE button to select between the tape player, CD player, or satellite radio (if equipped). To select Satellite Radio (if equipped), press the MODE button until the word SIRIUS appears. The following will be displayed in this order: After three seconds, the current channel name and number will be displayed for five seconds.
  • Page 180 180 UNDERSTANDING YOUR INSTRUMENT PANEL Push-Button While the CD changer is playing, press the NUMBER 1 push-button or the NUMBER 5 push-button to select a disc numbered higher or lower than the one currently being played. Seek Button Press the SEEK up or down to select another track on the same disc.
  • Page 181: Sales Code Rbq-Am/Fm Stereo Radio With 6 - Disc Cd Changer

    • Damaged disc • Water condensation on optics SALES CODE RBQ—AM/FM STEREO RADIO WITH 6 - DISC CD CHANGER UNDERSTANDING YOUR INSTRUMENT PANEL 181 Radio Operation Power/Volume Control Press the PWR/VOL control to turn the radio on. Turn the volume control clockwise to increase the volume. NOTE: Power to operate the radio is controlled by the ignition switch.
  • Page 182 182 UNDERSTANDING YOUR INSTRUMENT PANEL channel number will then be displayed for five seconds. The current channel name and number will then be displayed until an action occurs. CD’s may remain in the player while in the Satellite Radio mode. Seek Press and release the SEEK button to search for the next station in either the AM or FM mode.
  • Page 183: Cd Player Operation

    “1–6” button you wish to lock onto this station and press and release that button. If a button is not selected within 5 seconds after pressing the SET RND button, the station will continue to play but will not be locked into push- button memory.
  • Page 184 184 UNDERSTANDING YOUR INSTRUMENT PANEL Inserting The Compact Disc CAUTION! This CD player will accept 4 only. The use of other sized discs may damage the CD player mechanism. You may either insert or eject a disc with the radio OFF. If you insert a disc with the ignition ON and the radio OFF, the display will show the time of day.
  • Page 185 If you have ejected a disc and have not removed it within 15 seconds, it will be reloaded. If the CD is not removed, the radio will continue to play the non-removed CD. If the CD is removed and there are other CD’s in the radio, the radio will play the next CD.
  • Page 186 186 UNDERSTANDING YOUR INSTRUMENT PANEL PTY (Program Type) Button Pressing this button once will turn on the PTY mode for 5 seconds. If no action is taken during the 5 second time out the PTY icon will turn off. Pressing the PTY button within 5 seconds will allow the program format type to be selected.
  • Page 187 Program Type Radio Display Talk Talk Top 40 Top 40 Weather Weather By pressing the SEEK button when the PTY icon is displayed, the radio will be tuned to the next frequency station with the same selected PTY name. The PTY function only operates when in the FM mode.
  • Page 188: Sales Code Rbk-Am/ Fm Stereo Radio With Cd Player And Cd Changer Controls

    188 UNDERSTANDING YOUR INSTRUMENT PANEL SALES CODE RBK—AM/ FM STEREO RADIO WITH CD PLAYER AND CD CHANGER CONTROLS Radio Operation Power/Volume Control Press the ON/VOL control to turn the radio on. Turn the volume control clockwise to increase the volume. NOTE: Power to operate the radio is supplied through the ignition switch.
  • Page 189 Tune Press the TUNE control up or down to increase or decrease the frequency. If you press and hold the button, the radio will continue to tune until you release the button. The frequency will be displayed and continu- ously updated while the button is pressed. Balance The Balance control adjusts the left-to-right speaker bal- ance.
  • Page 190 190 UNDERSTANDING YOUR INSTRUMENT PANEL You may add a second station to each push-button by repeating the above procedure with this exception: Press the SET button twice and SET 2 will show in the display window. Each button can be set for SET 1 and SET 2 in both AM and FM.
  • Page 191: Cd Player Operation

    CD Player Operation NOTE: The ignition switch must be in the ON or ACC position and the volume control ON before the CD player will operate. Inserting The Compact Disc CAUTION! This CD player will accept 4 ⁄ inch (12 cm) discs only.
  • Page 192: Cd Changer Control Capability - If Equipped

    192 UNDERSTANDING YOUR INSTRUMENT PANEL FF/TUNE/RW Press FF (Fast Forward) and the CD player will begin to fast forward until FF is released. The RW ( Reverse) button works in a similar manner. Random Play — RND/Program Button 4 Press the RND (button 4) button while the CD is playing to activate Random Play.
  • Page 193 Push-Button While the CD changer is playing, press the NUMBER 1 push-button or the NUMBER 5 push-button to select a disc numbered higher or lower than the one currently being played. Seek Button Press the SEEK up or down to select another track on the same disc.
  • Page 194: Radio Display Messages

    194 UNDERSTANDING YOUR INSTRUMENT PANEL An ERR symbol will appear on the display if the laser is unable to read the Disc data for the following reasons: • Excessive vibration • Disc inserted upside down • Damaged disc • Water condensation on optics Radio Display Messages Your radio has been designed to display certain messages when a problem is detected with the CD player.
  • Page 195: Disc Cd Changer - If Equipped

    6 DISC CD CHANGER — IF EQUIPPED The CD changer is located below the radio in the instrument panel. The changer plays only 4 cm) discs. The changer holds up to 6 discs. Each disc is loaded and ejected through a single slot in front of the changer.
  • Page 196: Playing Discs

    196 UNDERSTANDING YOUR INSTRUMENT PANEL Playing Discs The radio will show the CD number, the CD track number, and the Track Time Elapsed while the radio is in the CD mode. If more than one CD is loaded in the changer, the changer will automatically play the next disc after playing the last track of the current disc.
  • Page 197: Program Button 5

    Program Button 5 Press this button to play the previous disc. Time Button Press this button to switch between time of day and CD track time. Changing Modes While in the radio mode, if a cassette is loaded, press the Mode button to switch to the tape mode.
  • Page 198: Operating Instructions - Cd/Dvd Changer

    198 UNDERSTANDING YOUR INSTRUMENT PANEL changing tracks or DVD functions, as well as selecting discs loaded in the 6 disc CD/DVD changer while listening to the Rear Audio/Video System. Operating Instructions — CD/DVD Changer Loading The CD/DVD Changer The CD/DVD changer is a multi-disc changer, and will accept up to six discs.
  • Page 199: Eject (Ejt) Button

    4. Repeat the process for loading any additional CD/ DVDs. The CD/DVD changer will stop while additional CD/DVDs are loaded. If the volume control is ON, the unit will switch from radio to CD/DVD mode and begin to play. The radio display will show the chapter number and index time in hours and minutes of the DVD, and the track number, minutes and second of the CD.
  • Page 200: Operating Instructions - Remote Control

    200 UNDERSTANDING YOUR INSTRUMENT PANEL Operating Instructions — Remote Control Power Button (PWR) Pressing the “POWER” button will turn the rear audio/ video system ON/OFF. The headphone symbol will flash for approximately 5 seconds in the radio display and sound can be heard from the headphones. NOTE: •...
  • Page 201 SEEK Button • CD/DVD changer Press the right side of the “SEEK” button for the next chapter or track on the disc. Press the left side to return to the beginning of the current chapter or track. Press the left side of the “SEEK” button twice within 2 seconds to return to the previous chapter or track.
  • Page 202: Operating Instructions - Video Screen

    202 UNDERSTANDING YOUR INSTRUMENT PANEL Operating Instructions — Video Screen Push up on the release button to lower the video screen. 1. Screen Width Button Changes the width of the screen picture. 2. Enter Button This button will enter the selection from the on-screen menu.
  • Page 203: Operating Instructions - Headphones

    Operating Instructions — Headphones 1. ON/OFF Button 2. Scan Button 3. Volume Control 4. LED UNDERSTANDING YOUR INSTRUMENT PANEL 203 Power Button Pressing the power button will turn the headphones ON/OFF. NOTE: • The headphones will turn off automatically and the red LED will illuminate for approximately 2 minutes when the radio or rear audio/video system is turned off.
  • Page 204 204 UNDERSTANDING YOUR INSTRUMENT PANEL headphones are on. This button is used only if the headphones are locked on to a source other than the vehicle’s radio. NOTE: When the “GREEN LED” is showing the head- phones are receiving the audio signal. When the “RED LED”...
  • Page 205: Operating Instructions - Mp3 Player

    General Information This device complies with part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the following two conditions: (1) This device may not cause harmful interference and (2) This device must accept any interference received, including interference that may cause undesired operation.
  • Page 206: Remote Sound System Controls - If Equipped

    206 UNDERSTANDING YOUR INSTRUMENT PANEL REMOTE SOUND SYSTEM CONTROLS — IF EQUIPPED The remote sound system controls are located on the rear surface of the steering wheel at the 3 and 9 O’clock positions. The right hand rocker switch has a push button in the center and controls the volume and mode of the sound system.
  • Page 207: Tape Player

    Tape Player Pressing the top of the switch once will go to the next selection on the cassette. Pressing the bottom of the switch once will go to the beginning of the current selection or to the beginning of the previous selection if it is within the first 5 seconds of the current selection.
  • Page 208: Cd/Dvd Disc Maintenance

    208 UNDERSTANDING YOUR INSTRUMENT PANEL 5. A loose tape should be corrected before use. To rewind a loose tape, insert the eraser end of a pencil into the tape drive gear and twist the pencil in the required directions. Maintain your cassette tape player. The head and capstan shaft in the cassette player can pick up dirt or tape deposits each time a cassette is played.
  • Page 209: Radio Operation And Cellular Phones

    RADIO OPERATION AND CELLULAR PHONES Under certain conditions, the cellular phone being On in your vehicle can cause erratic or noisy performance from your radio. This condition may be lessened or eliminated by relocating the cellular phone antenna. This condition is not harmful to the radio.
  • Page 210 210 UNDERSTANDING YOUR INSTRUMENT PANEL other than off, it selects the amount of air delivered to the passenger compartment. There are four blower speeds. The fan speed increases as you move the control clockwise. Dual Zone Temperature Control — If Equipped With the Dual Zone Temperature Control System, each front seat occupant can independently control the tem- perature of air coming from the outlets on their side of...
  • Page 211: Front Mode Control

    Front Mode Control The mode control allows you to choose from several patterns of air distribution. NOTE: To improve your selection choices, the system allows you to operate at intermediate positions between the major modes. These intermediate positions are iden- tified by the small dots.
  • Page 212 212 UNDERSTANDING YOUR INSTRUMENT PANEL Bi-Level Mode Air comes from both the instrument panel outlets, floor outlets and defrost. A slight amount of air is also directed through the side window demister outlets. NOTE: In many temperature lever positions, the bi- level mode is designed to provide cooler air out of the panel outlets and warmer air from the floor outlets.
  • Page 213 Mix Mode Air comes from the floor, defrost and side window demist outlets. This mode works best in cold or snowy conditions. It allows you to stay comfortable while keep- ing the windshield clear. UNDERSTANDING YOUR INSTRUMENT PANEL 213 Defrost Mode Air comes from the windshield and side window demist outlets.
  • Page 214: Manual Air Conditioning Operation

    214 UNDERSTANDING YOUR INSTRUMENT PANEL Defrost modes are selected. This is done to assist in drying the air and it will help in keeping the windows from fogging. Manual Air Conditioning Operation To turn on the air conditioning, set the front blower control to any position except O (OFF) and press the A/C button which is located next to the recirculation button.
  • Page 215 recirculation mode to rapidly cool the inside of the vehicle. The recirculation mode can also be used to temporarily block out outside odors, smoke, and dust. NOTE: • When the ignition switch is turned OFF, the recircula- tion feature will be cancelled. •...
  • Page 216: Manual Rear Zone Climate Control - If Equipped

    216 UNDERSTANDING YOUR INSTRUMENT PANEL • Start the engine, and continue to hold in the “Rear Wipe/Wash” button until the indicator light starts flashing repeatedly. • Press the recirculation button until the indicator light remains lit. • The selection will be stored when the ignition switch is turned OFF or if the “Rear Wipe/Wash”...
  • Page 217 Rear Blower Control The primary control for the rear blower is on the front climate control unit located on the instrument panel. The center knob on the front climate control unit has five positions, “REAR”, “OFF”, and a range of blower speeds. UNDERSTANDING YOUR INSTRUMENT PANEL 217 Only when the primary control for the rear blower is in the “REAR”...
  • Page 218 218 UNDERSTANDING YOUR INSTRUMENT PANEL CAUTION! Interior air enters the Manual Rear Zone Climate Control system through an intake grille located in the passenger side trim panel behind the third seat. The heater outlets are located in the passenger side trim panel just behind the sliding door.
  • Page 219: Infrared Three-Zone Automatic Temperature Control - If Equipped

    Infrared Three-Zone Automatic Temperature Control — If Equipped The Infrared Three-Zone Automatic Temperature Control System automatically maintains the interior comfort level desired by the driver and all passengers. This is accom- plished by using three infrared sensors, two located in the center of the instrument panel and one in the rear control unit.
  • Page 220 220 UNDERSTANDING YOUR INSTRUMENT PANEL desired temperature is displayed, the system will achieve and maintain that comfort level automatically. When the system is set up for your comfort level, it is not necessary to change the settings. You will experience the greatest efficiency by simply allowing the system to function automatically.
  • Page 221 • The “DELAY” symbol will flash to indicate that the feature as been enabled. Power Button This button turns the entire system ON/OFF. When the system is turned on it will return to the previous settings. Manual Operation This system offers a full complement of manual override features.
  • Page 222 222 UNDERSTANDING YOUR INSTRUMENT PANEL Bi-Level Mode Air comes from both the instrument panel outlets, floor outlets and defrost. A slight amount of air is also directed through the side window demister outlets. NOTE: In many temperature positions, the bi-level mode is designed to provide cooler air out of the panel outlets and warmer air from the floor outlets.
  • Page 223 Mix Mode Air comes from the floor, defrost and side window demist outlets. This mode works best in cold or snowy conditions. It allows you to stay comfortable while keep- ing the windshield clear. UNDERSTANDING YOUR INSTRUMENT PANEL 223 Defrost Mode Air comes from the windshield and side window demist outlets.
  • Page 224 224 UNDERSTANDING YOUR INSTRUMENT PANEL Depress the “A/C” button to turn on and off the air conditioning during manual operation only. Cool dehumidified air comes through the outlets selected by the Mode Control. To turn off the air condi- tioning, press the A/C button a second time. The A/C symbol in the display will turn off.
  • Page 225 Selecting the “AUTO” position for the Rear Automatic Temperature Control System from the front ATC control unit, illuminates a “LOCK” symbol in the rear display. The rear temperature and air source are controlled from the front ATC control unit. The “REAR SYSTEM” knob on the front ATC control unit has three positions, “REAR CONTROL”, “OFF”, and “AUTO”.
  • Page 226 226 UNDERSTANDING YOUR INSTRUMENT PANEL Rear Temperature Control button. Once the desired tem- perature is displayed, the system will achieve and main- tain that comfort level automatically. When the system is set up for your comfort level, it is not necessary to change the settings.
  • Page 227 CAUTION! Interior air enters the Rear Automatic Temperature Control System through an intake grille located in the passenger side trim panel behind the third seat. The heater outlets are located in the passenger side trim panel just behind the sliding door. Do not block or place objects directly in front of the inlet grille or heater outlets.
  • Page 228 228 UNDERSTANDING YOUR INSTRUMENT PANEL Bi-Level Mode Air comes from both the headliner outlets and the floor outlets. NOTE: In many temperature positions, the bi-level mode is designed to provide cooler air out of the head- liner outlets and warmer air from the floor outlets. Headliner Mode Air comes from the outlets in the headliner.
  • Page 229 UNDERSTANDING YOUR INSTRUMENT PANEL 229 Window Fogging Operating Tips Vehicle windows tend to fog on the inside in mild rainy or humid weather. To clear the windows, use the A/C, PANEL and blower controls. Direct the panel outlets toward the side windows. Do not use the Recirculation mode without A/C for long periods as fogging may occur.
  • Page 230: Rear Window Features

    230 UNDERSTANDING YOUR INSTRUMENT PANEL A/C Air Filter — If Equipped The climate control system filters out dust, pollen and some odors from the air. Strong odors can not be totally filtered out. Refer to section 7 “Air Conditioning” for filter replacement instructions.
  • Page 231: Rear Wiper Operation - Automatic Temperature Control Only

    Rear Wiper Operation — Automatic Temperature Control Only Press this button to have the rear wiper have a continuous wipe. When the ignition switch is in the ON/RUN position, the rear wiper switch position as well as an indicator light will show that the wiper is ON. UNDERSTANDING YOUR INSTRUMENT PANEL 231 Intermittent Rear Wiper Operation —...
  • Page 232 232 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: The washers will stop spraying if the switch is pressed longer than 10 seconds. Adding Washer Fluid The fluid reservoir for the windshield washers and the rear window washer is shared. It is located in the front of the engine compartment on the passenger side and should be checked for fluid level at regular intervals.
  • Page 233: Electric Rear Window Defroster - If Equipped

    Electric Rear Window Defroster — If Equipped Press this button to turn on the rear window defroster and the optional heated mirrors. A light will show that the defroster is on. The defroster automati- cally turns off after about 10 minutes of operation. If your vehicle is equipped with Infrared Three-Zone Automatic Temperature Control the rear defroster sym- bol will show in the display screen when the rear...
  • Page 235: Starting And Operating

    STARTING AND OPERATING CONTENTS Starting Procedures ..... 238 Normal Starting ..... . 238 Extremely Cold Weather (Below 29°...
  • Page 236 236 STARTING AND OPERATING Tire Safety Information ....252 Tire Markings ......252 Tire Identification Number (TIN) .
  • Page 237 Tire Rotation Recommendations ... . 273 Fuel Requirements ..... . 274 Reformulated Gasoline .
  • Page 238: Starting And Operating

    238 STARTING AND OPERATING STARTING PROCEDURES CAUTION! Long periods of engine idling, especially at high engine speeds, can cause excessive exhaust tempera- tures which can damage your vehicle. Do not leave your vehicle unattended with the engine running. WARNING! Do not leave animals or children inside parked vehicles in hot weather;...
  • Page 239: If Engine Fails To Start

    WARNING! Do not attempt to push or tow your vehicle to get it started. Vehicles equipped with an automatic trans- mission cannot be started this way. Unburned fuel could enter the catalytic converter and once the engine has started, ignite and damage the converter and vehicle.
  • Page 240: After Starting

    240 STARTING AND OPERATING CAUTION! To prevent damage to the starter, do not crank the engine for more than 15 seconds at a time. Wait 10 to 15 seconds before trying again. If the engine has been flooded, it may start to run, but not have enough power to continue running when the key is released.
  • Page 241: Automatic Transmission

    AUTOMATIC TRANSMISSION CAUTION! Damage to the transmission may occur if the follow- ing precautions are not observed: • Shift into PARK only after the vehicle has come to a complete stop. • Shift into or out of REVERSE only after the vehicle has come to a complete stop and the engine is at idle speed.
  • Page 242: Automatic Transmission Ignition Interlock System

    242 STARTING AND OPERATING Automatic Transmission Ignition Interlock System This system prevents the key from being removed unless the shift lever is in PARK. It also prevents shifting out of PARK unless the key is in the OFF or ON positions. NOTE: If a malfunction occurs, the system will trap the key in the ignition cylinder to warn you that this safety feature is inoperable.
  • Page 243 possible convenience. Your dealer has diagnostic equip- ment to determine if the problem could recur. If the transmission cannot be reset, dealer service is required. Gear Ranges DO NOT race the engine when shifting from PARK or NEUTRAL positions into another gear range. •...
  • Page 244: All Wheel Drive - If Equipped

    244 STARTING AND OPERATING • “3” Drive This range eliminates shifts into Overdrive. The transmis- sion will operate normally in First, Second and Third while in this range. The “3” position should also be used when descending steep grades to prevent brake system distress.
  • Page 245: Parking Brake

    CAUTION! All wheels must have the same size and type tires. Unequal tire sizes must not be used. Unequal tire size may cause failure of the power transfer unit and/or the viscous coupling. PARKING BRAKE When the parking brake is applied with the ignition switch on, the brake light in the instrument cluster will turn on.
  • Page 246: Brake System

    246 STARTING AND OPERATING added precaution, turn the front wheels toward the curb on a downhill grade and away from the curb on a uphill grade. The parking brake should always be applied when the driver is not in the vehicle. WARNING! Leaving children in a vehicle unattended is danger- ous for a number of reasons.
  • Page 247: Anti-Lock Brake System - If Equipped

    by increased pedal travel during application, greater pedal force required to slow or stop, and potential activation of the Brake Warning Lamp. Anti-Lock Brake System — If Equipped The Anti-Lock Brake System provides increased vehicle stability and brake performance under most braking conditions.
  • Page 248 248 STARTING AND OPERATING When the vehicle is driven over approximately 15 mph (25 km/h), you may also hear a slight clicking sound as well as some related motor noises. These noises are the system performing its self check cycle to ensure that the ABS system is working properly.
  • Page 249: Power Steering

    WARNING! • Anti-lock system (ABS) cannot prevent the natu- ral laws of physics from acting on the vehicle, nor can it increase braking or steering efficiency be- yond that afforded by the condition of the vehicle brakes and tires or the traction afforded. •...
  • Page 250: Traction Control - If Equipped

    250 STARTING AND OPERATING WARNING! Continued operation with reduced power steering assist could pose a safety risk to yourself and others. Service should be obtained as soon as possible. CAUTION! Prolong operation of the steering system at the end of the steering wheel travel will increase the steering fluid temperature and should be avoided when possible.
  • Page 251 • There is a Traction Control System malfunction • The system has been deactivated to prevent damage to the brake system due to overheated brake tempera- tures NOTE: The Traction Control will make buzzing or clicking sounds when in operation. STARTING AND OPERATING 251 NOTE: Extended heavy use of Traction Control may cause the system to deactivate and turn on the TRAC and...
  • Page 252: Tire Safety Information

    252 STARTING AND OPERATING TIRE SAFETY INFORMATION Tire Markings NOTE: • P(Passenger)-Metric tire sizing is based on U.S. design standards. P-Metric tires have the letter “P” molded into the sidewall preceding the size designation. Ex- ample: P215/65R15 95H. • European Metric tire sizing is based on European design standards.
  • Page 253 Tire Sizing Chart Size Designation: P = Passenger car tire size based on U.S. design standards ...blank... = Passenger car tire based on European design standards LT = Light Truck tire based on U.S. design standards T = Temporary Spare tire 31 = Overall Diameter in Inches (in) 215 = Section Width in Milimeters (mm) 65 = Aspect Ratio in Percent (%)
  • Page 254 254 STARTING AND OPERATING Service Description: 95 = Load Index —A numerical code associated with the maximum load a tire can carry. H = Speed Symbol —A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions.
  • Page 255: Tire Identification Number (Tin)

    Tire Identification Number (TIN) The TIN may be found on one or both sides of the tire however the date code may only be on one side. Tires with white sidewalls will have the full TIN including date code located on the white sidewall side of the tire. DOT = Department of Transportation —This symbol certifies that the tire is in compliance with the U.S.
  • Page 256: Tire Loading And Tire Pressure

    256 STARTING AND OPERATING Tire Loading and Tire Pressure Tire Placard Location NOTE: Some vehicles have a “Tire and Loading Infor- mation” placard located on the driver’s side “B” pillar. Tire and Loading Information Placard This placard tells you important information about the, 1) number of people that can be carried in the vehicle 2) the total weight your vehicle can carry 3) the tire size designed for your vehicle...
  • Page 257 Loading The vehicle maximum load on the tire must not exceed the load carrying capacity of the tire on your vehicle. You will not exceed the tire’s load carrying capacity if you adhere to the loading conditions, tire size and cold tire inflation pressures specified on the Tire and Loading Information placard and the Vehicle Loading section of this manual.
  • Page 258 258 STARTING AND OPERATING 5. Determine the combined weight of luggage and cargo being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load capacity calculated in step 4. 6. If your vehicle will be towing a trailer, load from your trailer will be transferred to your vehicle.
  • Page 259 STARTING AND OPERATING 259...
  • Page 260: Tires-General Information

    260 STARTING AND OPERATING WARNING! Overloading of your tire is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle-never overload them. TIRES—GENERAL INFORMATION Tire Pressure Proper tire inflation pressure is essential to the safe and satisfactory operation of your vehicle.
  • Page 261: Tire Inflation Pressures

    2. Economy— Improper inflation pressures can cause uneven wear patterns to develop across the tire tread. These abnormal wear patterns will reduce tread life resulting in a need for earlier tire replacement. Underinflation also increases tire rolling resistance and results in higher fuel consumption. 3.
  • Page 262 262 STARTING AND OPERATING The pressure should be checked and adjusted as well as inspecting for signs of tire wear or visible damage at least once a month. Use a good quality pocket-type gauge to check tire pressure. Do not make a visual judgement when determining proper inflation.
  • Page 263 Tire pressure may increase from 2 to 6 psi (13 to 40 kPa) during operation. DO NOT reduce this normal pressure build up or your tire pressure will be too low. Tire Pressures for High Speed Operation The manufacturer advocates driving at safe speeds within posted speed limits.
  • Page 264: Radial-Ply Tires

    264 STARTING AND OPERATING Radial-Ply Tires WARNING! Combining radial ply tires with other types of tires on your vehicle will cause your vehicle to handle poorly. The instability could cause an accident. Al- ways use radial ply tires in sets of four (or 6, in case of trucks with dual rear wheels).
  • Page 265: Tire Spinning

    Do not install a wheel cover or attempt to mount a conventional tire on the compact spare wheel, since the wheel is designed specifically for the compact spare. CAUTION! Because of the reduced ground clearance, do not take your vehicle through an automatic car wash with the compact spare installed.
  • Page 266: Tread Wear Indicators

    266 STARTING AND OPERATING Tread Wear Indicators Tread wear indicators are in the original equipment tires to help you in determining when your tires should be replaced. These indicators are molded into the bottom of the tread grooves and will appear as bands when the tread depth becomes 1/16 inch (2 mm).
  • Page 267: Alignment And Balance

    WARNING! • Do not use a tire, wheel size or rating other than that specified for your vehicle. Some combinations of unapproved tires and wheels may change suspension dimensions and performance characteristics, result- ing in changes to steering, handling, and braking of your vehicle.
  • Page 268: All Wheel Drive (Awd) - If Equipped

    268 STARTING AND OPERATING Improper alignment will not cause vehicle vibration. Vibration may be a result of tire and wheel out-of- balance. Proper balancing will reduce vibration and avoid tire cupping and spotty wear. ALL WHEEL DRIVE (AWD) — IF EQUIPPED CAUTION! All Wheel Drive (AWD) vehicles must have the same size and type tires on all wheel positions.
  • Page 269: 1,2,3, Or 4 Tire(S) Low Pressure

    are significantly underinflated. It is particularly impor- tant, therefore, for you to check the tire pressure in all of your tires regularly and maintain proper pressure. 1,2,3, OR 4 TIRE(S) LOW PRESSURE Low tire pressure levels of 28 psi [1.9 bars] (193 kPa) or less detected in one or more tires.
  • Page 270: Tire Pressure Now Available

    270 STARTING AND OPERATING TIRE PRESSURE NOW AVAILABLE The TPM system is functioning normally and the external interference is no longer affecting the system. SPARE TIRE IN USE? YES/NO The TPM system requires more information to determine the correct mode of operation, one or more of the vehicle active tires has been replaced by the spare, a wheel rim not equipped with a TPM sensor or the TPM system requires service.
  • Page 271 CAUTION! The TPM system has been optimized for the original equipment tires and wheels. TPM system pressures have been established for the tire size equipped on your vehicle. Undesirable operation or sensor dam- age may result when using replacement equipment that is not of the same size, type, and/or style.
  • Page 272: General Information

    272 STARTING AND OPERATING General Information This device complies with part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the following conditions: • This device may not cause harmful interference. • This device must accept any interference received, including interference that may cause undesired op- eration.
  • Page 273: Snow Tires

    NOTE: In order to avoid damage to tires, chains, and your vehicle do not drive for a prolonged period of time on dry pavement. Observe the tire chain manufacturer’s instructions on method of installation, operating speed, and conditions for usage. Always use the lower suggested operating speed if both the chain manufacturer and vehicle manufacture suggest a maximum speed.
  • Page 274: Fuel Requirements

    274 STARTING AND OPERATING Section of this manual. More frequent rotation is permis- sible if desired. The reasons for any rapid or unusual wear should be corrected prior to rotation being per- formed. NOTE: The Tire Pressure Monitor system must be retrained following a tire rotation.
  • Page 275: Reformulated Gasoline

    If you experience these symptoms, try another brand of “regular” gasoline be- fore considering service for the vehicle. Over 40 automobile manufacturers around the world have issued and endorsed consistent gasoline specifica- tions (the World Wide Fuel Charter, WWFC) to define fuel properties necessary to deliver enhanced emissions, engine performance, and durability for your vehicle.
  • Page 276: Mmt In Gasoline

    276 STARTING AND OPERATING CAUTION! DO NOT use gasolines containing Methanol. Use of these blends may result in starting and driveability problems and may damage critical fuel system com- ponents. Problems that result from using methanol/gasoline blends are not the responsibility of the manufacturer and may not be covered by the vehicle warranty.
  • Page 277: Sulfur In Gasoline

    Sulfur In Gasoline Your vehicle may have been designed to meet California low emission standards when using cleaner burning California reformulated gasoline with low sulfur. This vehicle may be sold nationwide. Your vehicle will oper- ate satisfactorily on fuels meeting Federal specification, but emission control system performance may be ad- versely affected.
  • Page 278: Fuel System Cautions

    278 STARTING AND OPERATING Fuel System Cautions CAUTION! Follow these guidelines to maintain your vehicle’s performance: • The use of leaded gas is prohibited by Federal law. Using leaded gasoline can impair engine performance, damage the emission control system, and could result in loss of warranty coverage.
  • Page 279: Adding Fuel

    • Do not inhale exhaust gases. They contain carbon monoxide, a colorless and odorless gas which can kill. Never run the engine in a closed area, such as a garage, and never sit in a parked vehicle with the engine running for an extended period. If the vehicle is stopped in an open area with the engine running for more than a short period, adjust the ventilation system to force fresh, outside air into the vehicle.
  • Page 280 280 STARTING AND OPERATING CAUTION! Damage to the fuel system or emission control system could result from using an improper fuel tank filler tube cap (gas cap). A poorly fitting cap could let impurities into the fuel system. NOTE: The driver’s side sliding door cannot be opened while the fuel door is open.
  • Page 281: Vehicle Loading

    WARNING! • Remove the fuel tank filler tube cap (gas cap) slowly to prevent fuel spray from the filler neck which may cause injury. • The volatility of some gasolines may cause a buildup of pressure in the fuel tank that may increase while you drive.
  • Page 282: Gross Vehicle Weight Rating (Gvwr)

    282 STARTING AND OPERATING • Vehicle Identification Number (VIN) • Type of Vehicle • Month Day and Hour of Manufacture (MDH) The bar code allows a computer scanner to read the Vehicle Identification Number (VIN). Gross Vehicle Weight Rating (GVWR) The GVWR is the total allowable weight of your vehicle.
  • Page 283: Loading

    Overloading can cause potential safety hazards and shorten useful service life. Heavier axles or suspension components do not necessarily increase the vehicle’s GVWR. Loading To load your vehicle properly, first figure out its empty weight, axle by axle and side by side. Store heavier items down low and be sure you distribute their weight as evenly as possible.
  • Page 284: Trailer Towing

    284 STARTING AND OPERATING TRAILER TOWING In this section you will find safety tips and information on limits to the type of towing you can reasonably do with your vehicle. Before towing a trailer carefully re- view this information to tow your load as efficiently and safely as possible.
  • Page 285 NOTE: Using the “3” range while operating the vehicle under heavy operating conditions will improve perfor- mance and extend transaxle life by reducing excessive shifting and heat build up. WARNING! Connecting trailer brakes to your vehicle’s hydraulic brake lines can overload your brake system and cause it to fail.
  • Page 286 286 STARTING AND OPERATING TRAVEL CONDI- MAXIMUM TRAILER WEIGHT (TRAILER FRONTAL AREA NOT TO EXCEED 32 TION SQ. FT.) 3.3L,& 3.8L EN- GINES WITH 4-SPEED AUTO- MATIC TRANS- AXLE MAX. COMBINED WEIGHT OF VE- HICLE AND TRAILER NOT TO EXCEED 6,600 lbs (2993 kg) UP TO 2 PERSONS 1,800 lbs(816 kg )
  • Page 287 A load equalizing hitch is recommended for loaded trailer weights above 1,000 lbs (454 kg) and required for weights above 2,000 lbs (907 kg). CAUTION! If the trailer weighs more than 1,000 lbs (454 kg) loaded, it should have its own brakes and they should be of adequate capacity.
  • Page 289: What To Do In Emergencies

    WHAT TO DO IN EMERGENCIES CONTENTS Hazard Warning Flasher ....290 If Your Engine Overheats ....291 Jacking And Tire Changing .
  • Page 290: Hazard Warning Flasher

    290 WHAT TO DO IN EMERGENCIES HAZARD WARNING FLASHER The hazard flasher switch is located in the center of the instrument panel above the radio. To engage the Hazard Warning Flashers, depress the switch on the instrument panel. When the Hazard Warn- ing Switch is activated, all directional turn signals will flash on and off to warn oncoming traffic of an emer- gency.
  • Page 291: If Your Engine Overheats

    IF YOUR ENGINE OVERHEATS In any of the following situations, you can reduce the potential for overheating by taking the appropriate ac- tion. • On the highways — Slow down. • In city traffic — While stopped, put transmission in neutral, but do not increase engine idle speed.
  • Page 292: Jacking And Tire Changing

    292 WHAT TO DO IN EMERGENCIES WARNING! A hot engine cooling system is dangerous. You or others could be badly burned by steam or boiling coolant. You may want to call a service center if your vehicle overheats. If you decide to look under the hood yourself, see Section 7, Maintenance, of this manual.
  • Page 293: Jack Location

    Jack Location The jack and jack-handle are stowed behind the rear left side trim panel in the cargo area. Pull up on the lever to release the cover. WHAT TO DO IN EMERGENCIES 293 Spare Tire Stowage The spare tire is stowed under the rear of the vehicle by means of a cable winch mechanism.
  • Page 294: Preparations For Jacking

    294 WHAT TO DO IN EMERGENCIES Spare Tire Removal Fit the jack-handle over the drive nut. Rotate the nut to the left until the spare is on the ground with enough slack cable to allow you to pull the tire out from under the vehicle.
  • Page 295: Jacking Instructions

    • Turn on the Hazard Warning Flasher. • Block both the front and rear of the wheel diagonally oppo- site the jacking position. For example, if changing the right front tire, block the left rear wheel. • Passengers should not remain in the vehicle when the vehicle is being jacked.
  • Page 296 296 WHAT TO DO IN EMERGENCIES properly engaged in the described location. Do not raise the vehicle until you are sure the jack is securely engaged. 5. Raise the vehicle by turning the jack screw to the right, using the swivel wrench. Raise the vehicle only until the tire just clears the surface and enough clearance is obtained to install the spare tire.
  • Page 297 nuts until each nut has been tightened twice. Correct wheel nut tightness is 130 N·m (95 ft. lbs). If in doubt about the correct tightness, have them checked with a torque wrench by your dealer or at a service station. 10.
  • Page 298: Jump-Starting Procedures If Battery Is Low

    298 WHAT TO DO IN EMERGENCIES JUMP-STARTING PROCEDURES IF BATTERY IS WARNING! Take care to avoid the radiator cooling fan whenever the hood is raised. It can start anytime the ignition switch is on. You can be hurt by the fan. WARNING! •...
  • Page 299: Driving On Slippery Surfaces

    1. Wear eye protection and remove any metal jewelry such as watch bands or bracelets that might make an inadvertent electrical contact. 2. When boost is provided by a battery in another vehicle, park that vehicle within booster cable reach and without letting the vehicles touch.
  • Page 300: Traction

    300 WHAT TO DO IN EMERGENCIES WARNING! Rapid acceleration on slippery surfaces is danger- ous. Unequal traction can cause sudden pulling of the front wheels. You could lose control of the vehicle and possibly have an accident. Accelerate slowly and carefully whenever there is likely to be poor traction (ice, snow, wet mud, loose sand, etc.).
  • Page 301: Towing A Disabled Vehicle

    WARNING! Fast spinning tires can be dangerous. Forces gener- ated by excessive wheel speeds may cause tire dam- age or failure. A tire could explode and injure someone. Do not spin your vehicle’s wheels faster than 35 mph (55 km/h) when you are stuck. And don’t let anyone near a spinning wheel, no matter what the speed.
  • Page 302: Without The Ignition Key

    302 WHAT TO DO IN EMERGENCIES CAUTION! • Do not attempt to tow this vehicle from the front with sling type towing equipment. Damage to the front fascia will result. • Always use wheel lift equipment when towing from the front. The only other approved method of towing is with a flat bed truck.
  • Page 303: Towing This Vehicle Behind Another Vehicle With A Tow Dolley

    WHAT TO DO IN EMERGENCIES 303 TOWING THIS VEHICLE BEHIND ANOTHER VEHICLE WITH A TOW DOLLEY The manufacture does not recommend that you tow an All-Wheel Drive (AWD) or front wheel drive vehicle on a tow dolley. Vehicle damage may occur.
  • Page 305: Maintaining Your Vehicle

    MAINTAINING YOUR VEHICLE CONTENTS 3.3L/3.8L Engines ..... . 308 Onboard Diagnostic System — OBD II ..309 Emissions Inspection And Maintenance Programs .
  • Page 306 306 MAINTAINING YOUR VEHICLE Steering Shaft Seal ....323 Steering Linkage ..... . 323 Drive Shaft Universal Joints .
  • Page 307 Front Fog Light ..... . 349 Rear Tail, Stop, Turn Signal, Side Marker And Back-Up Lights ..... . . 350 Center High Mounted Stop Light (CHMSL) .
  • Page 308: Maintaining Your Vehicle

    308 MAINTAINING YOUR VEHICLE 3.3L/3.8L ENGINES...
  • Page 309: Onboard Diagnostic System - Obd Ii

    ONBOARD DIAGNOSTIC SYSTEM — OBD II Your vehicle is equipped with a sophisticated onboard diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic transmission control systems. When these systems are operating properly, your vehicle will provide excellent performance and fuel economy, as well as engine emis- sions well within current government regulations.
  • Page 310: Emissions Inspection And Maintenance Programs

    310 MAINTAINING YOUR VEHICLE EMISSIONS INSPECTION AND MAINTENANCE PROGRAMS In some localities, it may be a legal requirement to pass an inspection of your vehicle’s emissions control system. Failure to pass could prevent vehicle registration. For states which have an I/M (Inspection and Maintenance) requirement, this check verifies the following: the MIL (Malfunction Indicator Lamp) is functioning and is not on when the engine is running,...
  • Page 311: Replacement Parts

    ignition key or start the engine. This means that your vehicle’s OBD system is not ready and you should not proceed to the I/M station. b. The MIL will not flash at all and will remain fully illuminated until you turn off the ignition key or start the engine.
  • Page 312: Maintenance Procedures

    312 MAINTAINING YOUR VEHICLE NOTE: Intentional tampering with emissions control systems can result in civil penalties being assessed against you. WARNING! You can be badly injured working on or around a motor vehicle. Do only that service work for which you have the knowledge and the proper equipment.
  • Page 313: Engine Oil

    Engine Oil Checking Oil Level To assure proper engine lubrication, the engine oil must be maintained at the correct level. Check the oil level at regular intervals, such as every fuel stop. The best time to check the engine oil level is about 5 minutes after a fully warmed engine is shut off or before starting the engine after it has sat overnight.
  • Page 314 314 MAINTAINING YOUR VEHICLE Change Engine Oil Road conditions and your kind of driving affects the interval at which your oil should be changed. Check the following list to see if any apply to you. • Day or night temperatures are below 32°F (0°C). •...
  • Page 315 American Petroleum Institute (API) Engine Oil Identification Symbol This symbol means that the oil has been certified by the American Petroleum Institute (API). The manufacture only recommends API Certified engine oils that meet requirements DaimlerChrysler Material Stan- dard MS-6395. Use Mopar or an equivalent oil meeting the specifi- cation MS-6395.
  • Page 316: Engine Oil Filter

    316 MAINTAINING YOUR VEHICLE Synthetic Engine Oils There are a number of engine oils being promoted as either synthetic or semi-synthetic. If you chose to use such a product, use only those oils that meet the Ameri- can Petroleum Institute (API) and SAE viscosity stan- dard.
  • Page 317: Spark Plugs

    Belts should be inspected for evidence of cuts, cracks, or glazing, and replaced if there is indication of damage which could result in belt failure. If adjustment is re- quired, see your authorized dealer for service. Low generator belt tension can cause battery failure. A special tool is required to properly measure tension and to restore belt tension to factory specifications.
  • Page 318: Engine Fuel Filter

    318 MAINTAINING YOUR VEHICLE Engine Fuel Filter A plugged fuel filter can cause stalling, limit the speed at which a vehicle can be driven or cause hard starting. Should an excessive amount of dirt accumulate in the fuel tank, filter replacement may be necessary. Catalytic Converter The catalytic converter requires the use of unleaded fuel only.
  • Page 319: Maintenance-Free Battery

    WARNING! A hot exhaust system can start a fire if you park over materials that can burn. Such materials might be grass or leaves coming into contact with your ex- haust system. Do not park or operate your vehicle in areas where your exhaust system can contact any- thing that can burn.
  • Page 320 320 MAINTAINING YOUR VEHICLE WARNING! Battery fluid is a corrosive acid solution and can burn or even blind you. Don’t allow battery fluid to contact your eyes, skin or clothing. Don’t lean over a battery when attaching clamps. If acid splashes in eyes or on skin, flush the area immediately with large amounts of water.
  • Page 321: Air Conditioner

    Air Conditioner For best possible performance, your air conditioner should be checked and serviced by an Authorized Dealer at the start of each warm season. This service should include cleaning of the condenser fins and a system performance check. Drive belt tension should also be checked at this time.
  • Page 322: Power Steering - Fluid Check

    322 MAINTAINING YOUR VEHICLE Refrigerant Recovery And Recycling The air conditioning system of your vehicle contains R-134a, a refrigerant that does not deplete the ozone layer in the upper atmosphere. The manufacturer recommends that air conditioning service be done by facilities using refrigerant recycling and recovery equipment that meets SAE standard J1991.
  • Page 323: Front Suspension Ball Joints

    If necessary, add fluid to restore to the proper indicated level. With a clean cloth, wipe any spilled fluid from all surfaces. Refer to Recommended Fluids, Lubricants, and Genuine Parts for correct fluid type. Front Suspension Ball Joints The front suspension ball joints are permanently sealed. No regular maintenance is required for these compo- nents.
  • Page 324: Body Lubrication

    324 MAINTAINING YOUR VEHICLE Body Lubrication Locks and all body pivot points, including such items as seat tracks, doors, liftgate, sliding doors and hood hinges, should be lubricated periodically to assure quiet, easy operation and to protect against rust and wear. Prior to the application of any lubricant, the parts concerned should be wiped clean to remove dust and grit;...
  • Page 325: Exhaust System

    washer solvent (not radiator antifreeze) and operate the system for a few seconds to flush out the residual water. The washer fluid reservoir will hold a full gallon of fluid when the Low Washer Fluid Light illuminates. MAINTAINING YOUR VEHICLE 325 Exhaust System The best protection against carbon monoxide entry into the vehicle body is a properly maintained engine exhaust...
  • Page 326: Cooling System

    326 MAINTAINING YOUR VEHICLE WARNING! Exhaust gases can injure or kill. They contain carbon monoxide (CO) which is colorless and odorless. Breathing it can make you unconscious and can eventually poison you. To avoid breathing CO, fol- low the preceding safety tips. Cooling System Inspection WARNING!
  • Page 327 Coolant Checks Coolant protection checks should be made every 12 months (prior to the onset of freezing weather, where applicable). If coolant is dirty or rusty in appearance, the system should be drained, flushed and refilled with fresh coolant. Check the front of the A/C condenser for any accumulation of bugs, leaves, etc.
  • Page 328 328 MAINTAINING YOUR VEHICLE CAUTION! Mixing of coolants other than specified (non- HOAT), may result in engine damage that may not be covered under the new vehicle warranty, and decreased corrosion protection. If a non-HOAT cool- ant is introduced into the cooling system in an emergency, it should be replaced with the specified coolant as soon as possible.
  • Page 329 Coolant Pressure Cap The coolant pressure cap must be fully tightened to prevent loss of coolant, and to insure that coolant will return to the radiator from the coolant recovery bottle. The coolant pressure cap should be inspected and cleaned if there is any accumulation of foreign material on the sealing surfaces.
  • Page 330 330 MAINTAINING YOUR VEHICLE operating temperature is satisfactory, the coolant recov- ery bottle need only be checked once a month. When additional coolant is needed to maintain the proper level, it should be added to the coolant recovery bottle. Do not overfill. Points to Remember NOTE: When the vehicle is stopped after a few miles of operation, you may observe vapor coming from the front...
  • Page 331: Hoses And Vacuum/Vapor Harnesses

    • Do not change the thermostat for summer or winter operation. If replacement is ever necessary, install ONLY the correct type thermostat. Other designs may result in unsatisfactory cooling performance. • Increasing engine speed at idle does not reduce cool- ant temperature! Put transmission in NEUTRAL and let engine idle at normal engine idle speed.
  • Page 332 332 MAINTAINING YOUR VEHICLE WARNING! Riding the brakes can lead to brake failure and possibly an accident. Driving with your foot resting or riding on the brake pedal can result in abnormally high brake temperatures, excessive lining wear, and possible brake damage. You wouldn’t have your full braking capacity in an emergency.
  • Page 333: Master Cylinder - Abs Brakes Brake Fluid Level Check

    replaced immediately! Eventual deterioration of the hose can take place resulting in a possibility of a burst failure. WARNING! Worn brake hoses can burst and cause brake failure. You could have an accident. If you see any signs of cracking, scuffing, or worn spots, have the brake hoses replaced immediately.
  • Page 334: Fuel System Hoses

    334 MAINTAINING YOUR VEHICLE WARNING! Overfilling the brake fluid reservoir can result in spilling brake fluid on hot engine parts and the brake fluid catching fire. Use only brake fluid that has been in a tightly closed container to avoid contamination from foreign matter or moisture.
  • Page 335: Automatic Transmission

    Automatic Transmission The automatic transmission and differential assembly are contained within a single housing. All automatic transmissions are equipped with a conven- tional filler tube and dipstick. If fluid is added, it should be added through the dipstick hole in the case. The dipstick is located just behind the radiator, lower right side.
  • Page 336 336 MAINTAINING YOUR VEHICLE Procedure For Checking Fluid Level The fluid level in the automatic transmission should be checked whenever the vehicle is serviced. Operation with an improper fluid level will greatly reduce the life of the transmission and of the fluid. To properly check the automatic transmission fluid level, the following procedure must be used: 1.
  • Page 337: All Wheel Drive (Awd)

    CAUTION! Do not overfill. Dirt and water in the transmission can cause serious damage. To prevent dirt and water from entering the transmission after checking or replenishing fluid, make certain that the dipstick cap is reseated properly. Fluid and Filter Changes Automatic transmission fluid should be changed on all transmissions as follows: Normal Usage —...
  • Page 338 338 MAINTAINING YOUR VEHICLE Power Transfer Unit The fluid should be maintained at the bottom of the filler hole opening. If it becomes necessary to add or replace the fluid, use only the manufacturers recommended fluid, refer to Recommended Fluids, Lubricants and Genuine Parts for correct fluid type.
  • Page 339: Front And Rear Wheel Bearings

    Severe Usage is defined as: 1. More than 50% of vehicle operation in stop and go traffic where the vehicle is driven regularly for more than 45 minutes of continuous operation, such as in heavy city or in construction zone traffic, 2.
  • Page 340 340 MAINTAINING YOUR VEHICLE • Insects, tree sap and tar. • Salt in the air near seacoast localities. • Atmospheric fallout/industrial pollutants. Washing • Wash your vehicle regularly. Always wash your ve- hicle in the shade using a mild car wash soap, and rinse the panels completely with clear water.
  • Page 341 • If your vehicle is damaged due to an accident or similar cause which destroys the paint and protective coating have your vehicle repaired as soon as possible. The cost of such repairs is considered the responsibil- ity of the owner. •...
  • Page 342 342 MAINTAINING YOUR VEHICLE and Mopar Total Clean. Care should be taken to avoid soaking your leather upholstery with any liquid. Please do not use polishes, oils, cleaning fluids, solvents, deter- gents, or ammonia based cleaners to clean your leather upholstery.
  • Page 343: Cleaning The Instrument Panel And Underseat Cup Holders

    Seat Belt Maintenance Do not bleach, dye or clean the belts with chemical solvents or abrasive cleaners. This will weaken the fabric. Sun damage will also weaken the fabric. If the belts need cleaning, use a mild soap solution or lukewarm water.
  • Page 344: Installation

    344 MAINTAINING YOUR VEHICLE dip it back into the water about six times. This will loosen any remaining debris. Rinse the drawer thoroughly un- der warm running water. Shake the excess water from the drawer and dry the outer surfaces with a clean soft cloth. Let the drawer sit in a dish drainer overnight to allow the inside mechanism to dry.
  • Page 345: Vehicle Storage

    CAUTION! • When installing the Integrated Power Module cover, it is important to ensure the cover is prop- erly positioned and fully latched. Failure to do so may allow water to get into the Integrated Power Module, and possibly result in a electrical system failure.
  • Page 346: Replacement Light Bulbs

    346 MAINTAINING YOUR VEHICLE air conditioning system at idle for about five minutes in the fresh air and high blower setting. This will insure adequate system lubrication to minimize the possibility of compressor damage when the system is started again. REPLACEMENT LIGHT BULBS LIGHT BULBS —...
  • Page 347: Bulb Replacement

    BULB REPLACEMENT Headlights 1. Remove the three screws securing the headlight mod- ule. 2. Turn the bulb socket retaining ring counterclockwise. MAINTAINING YOUR VEHICLE 347 3. Disconnect the electrical connector and replace the bulb.
  • Page 348: Front Park/Turn Signal And Sidemarker Lights

    348 MAINTAINING YOUR VEHICLE CAUTION! Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life. If the bulb comes in contact with an oily surface, clean the bulb with rubbing alcohol. Front Park/Turn Signal and Sidemarker Lights 1.
  • Page 349: Front Fog Light

    2. Twist the turn signal socket to remove from the headlight module and pull bulb from socket. 3. Replace bulb, reinstall socket and then reinstall the headlight module. MAINTAINING YOUR VEHICLE 349 Front Fog Light 1. Reach behind the front fascia from under the vehicle. 2.
  • Page 350: Rear Tail, Stop, Turn Signal, Side Marker And Back-Up Lights

    350 MAINTAINING YOUR VEHICLE Rear Tail, Stop, Turn Signal, Side Marker and Back-up Lights 1. Raise the liftgate. 2. Remove the two light assembly push-in type fasteners. 3. Squeeze the socket assembly tabs to remove it from the housing. 4. Pull the bulb to remove it from the socket. 5.
  • Page 351: Center High Mounted Stop Light (Chmsl)

    Center High Mounted Stop Light (CHMSL) 1. Remove the two screws securing the CHMSL. 2. Twist the bulb socket to remove from the CHMSL housing. 3. Pull the bulb out of the socket. 4. Replace the bulb, reinstall the socket and reattach the CHMSL.
  • Page 352: Recommended Fluids, Lubricants And Genuine Parts

    352 MAINTAINING YOUR VEHICLE RECOMMENDED FLUIDS, LUBRICANTS AND GENUINE PARTS Engine Component Engine Coolant Engine Oil Oil Filter 3.3/3.8 liter engines Spark Plugs Fuel Selection Fluids, Lubricants and Genuine Parts Mopar Antifreeze/Coolant 5 Year/100,000 Mile Formula HOAT (Hybrid Or- ganic Additive Technology) Use API Certified, meeting material standard MS-6395, (GF-3).
  • Page 353: Chassis

    Chassis Component Automatic Transmission AWD Power Transfer Unit AWD Overrunning Clutch AWD Rear Carrier Brake Master Cylinder Power Steering Reservoir Fluids, Lubricants and Genuine Parts. Mopar ATF+4 Automatic Transmission Fluid. Mopar Gear Lubricant 75W-90. Mopar ATF+4 Automatic Transmission Fluid. Mopar Gear Lubricant 75W-90. Mopar DOT 3 and SAE J1703 should be used.
  • Page 355 MAINTENANCE SCHEDULES CONTENTS Emission Control System Maintenance ..356 Maintenance Schedules ....356 Schedule “B” ......359 Schedule “A”...
  • Page 356: Emission Control System Maintenance

    356 MAINTENANCE SCHEDULES EMISSION CONTROL SYSTEM MAINTENANCE The “Scheduled” maintenance services, listed in bold type must be done at the times or mileages specified to assure the continued proper functioning of the emission control system. These, and all other maintenance services included in this manual, should be done to provide best vehicle performance and reliability.
  • Page 357 • Taxi, police, or delivery service (commercial ser- vice). • Off-road or desert operation. NOTE: Most vehicles are operated under the conditions listed for Schedule B . Second is Schedule “A”. It is for vehicles that are not operated under any of the conditions listed under Sched- ule B .
  • Page 358 358 MAINTENANCE SCHEDULES At Each Oil Change • Change the engine oil filter. • Inspect the exhaust system. • Inspect the brake hoses. • Inspect the CV joints and front suspension compo- nents. • Check the automatic transmission fluid level. •...
  • Page 359: Schedule "B" 359

    SCHEDULE “B” Follow schedule “B” if you usually operate your vehicle under one or more of the following conditions. Change the automatic transmission fluid and filter every 60,000 miles (96 000 km) if the vehicle is usually operated under one or more of the conditions marked with an •...
  • Page 360 360 SCHEDULE “B” Miles (Kilometers) Change engine oil and engine oil filter. Inspect the brake linings. Inspect the engine air cleaner filter, replace if necessary. * Replace the engine air cleaner filter. * Change the All Wheel Drive (AWD) power transfer unit fluid.
  • Page 361 Miles (Kilometers) Change engine oil and engine oil filter. Inspect the brake linings. Inspect the engine air cleaner filter, replace if necessary. * Replace the engine air cleaner filter. Inspect the tie rod ends and boot seals. Inspect the PCV valve and replace as neces- sary.* Change the All Wheel Drive (AWD) power transfer unit fluid.
  • Page 362 362 SCHEDULE “B” Miles (Kilometers) Change engine oil and engine oil filter. Inspect the brake linings. Inspect the engine air cleaner filter, replace if necessary. * Replace the engine air cleaner filter. * Change the All Wheel Drive power transfer unit fluid.
  • Page 363 Miles (Kilometers) Change engine oil and engine oil filter. Inspect the brake linings. Inspect the engine air cleaner filter, replace if neces- sary. * Replace the engine air cleaner filter. Inspect the tie rod ends and boot seals. Inspect the PCV valve and replace if necessary.* Inspect the serpentine drive belt on 3.3 liter and 3.8 liter engines, replace if necessary.
  • Page 364 364 SCHEDULE “B” Miles (Kilometers) Change engine oil and engine oil filter. Inspect the brake linings. Inspect the engine air cleaner filter, replace if necessary. * Replace the engine air cleaner filter Replace the spark plugs on 3.3 liter and 3.8 liter engines.
  • Page 365 Miles (Kilometers) Change the All Wheel Drive power transfer unit fluid. (See the note at the end of this chart.) Change the All Wheel Drive (AWD) overrun- ning clutch and rear carrier fluid. (See note at the end of this chart) Replace the air conditioning filter.
  • Page 366 366 SCHEDULE “B” Miles (Kilometers) Change engine oil and engine oil filter. Inspect the brake linings. Inspect the engine air cleaner filter, replace if necessary. * Replace the engine air cleaner filter * Change the All Wheel Drive (AWD) power transfer unit fluid.
  • Page 367 Miles (Kilometers) Change engine oil and engine oil filter. Inspect the brake linings. Inspect the engine air cleaner filter, replace if neces- sary. * Replace the engine air cleaner filter. Inspect the tie rod ends and boot seals. Inspect the PCV valve and replace as necessary.* Inspect the serpentine drive belt on 3.3 liter and 3.8 liter engines, replace if necessary.
  • Page 368 368 SCHEDULE “B” Inspection and service should also be performed anytime a malfunction is observed or suspected. Retain all re- ceipts. NOTE: The AWD power transfer unit fluid and the AWD overrunning clutch/ rear carrier fluid must be changed at the intervals shown in schedule B if the vehicle is operated under any of the conditions noted by a diamond at the beginning of the schedule.
  • Page 369: Schedule "A

    SCHEDULE “A” Miles (Kilometers) [Months] Change engine oil and engine oil filter. Inspect the brake linings. Inspect the engine air cleaner filter, replace if necessary. * Replace the engine air cleaner filter. Inspect the tie rod ends and boot seals. Replace the air conditioning filter.
  • Page 370 370 SCHEDULE “A” Miles (Kilometers) [Months] Change engine oil and engine oil filter. Inspect the brake linings. Inspect the engine air cleaner filter, replace if necessary. * Replace the engine air cleaner filter. Inspect the tie rod ends and boot seals. Check the PCV valve and replace, if neces- sary.* Inspect the serpentine drive belt on 3.3 liter...
  • Page 371 Miles (Kilometers) [Months] Change engine oil and engine oil filter. Inspect the brake linings. Inspect the engine air cleaner filter, replace if necessary. * Replace the engine air cleaner filter. Inspect the tie rod ends and boot seals. Check and replace the PCV valve , if necessary.* Inspect the serpentine drive belt on 3.3 liter and 3.8 liter engines, replace if necessary.
  • Page 372 372 SCHEDULE “A” Miles (Kilometers) [Months] Change engine oil and engine oil filter. Inspect the brake linings. Inspect the engine air cleaner filter, replace if necessary. * Replace the engine air cleaner filter. Inspect the tie rod ends and boot seals. Check the PCV valve and replace, if necessary.* Inspect the serpentine drive belt on 3.3 liter and 3.8 liter engines, replace if necessary.
  • Page 373 Inspection and service should also be performed anytime a malfunction is observed or suspected. Retain all re- ceipts. SCHEDULE “A” 373 WARNING! You can be badly injured working on or around a motor vehicle. Do only that service work for which you have the knowledge and the right equipment.
  • Page 375: If You Need Consumer Assistance

    IF YOU NEED CONSUMER ASSISTANCE CONTENTS Suggestions For Obtaining Service For Your Vehicle ......376 Prepare For The Appointment .
  • Page 376: Suggestions For Obtaining Service For Your Vehicle

    376 IF YOU NEED CONSUMER ASSISTANCE SUGGESTIONS FOR OBTAINING SERVICE FOR YOUR VEHICLE Prepare For The Appointment If you’re having warranty work done, be sure to have the right papers with you. Take your warranty folder. All work to be performed may not be covered by the warranty, discuss additional charges with the service manager.
  • Page 377 The manufacturer has empowered its dealers to make warranty and repair decisions that ensure you are not inconvenienced. There is no need for you to wait for a decision from the manufacturer. If a special circumstance occurs that requires information from the manufacturer, we have asked the dealer’s service management to make the contact on your behalf.
  • Page 378 378 IF YOU NEED CONSUMER ASSISTANCE In Mexico contact: Av. Prolongacion Paseo de la Reforma, 1240 Sante Fe C.P. 05109 Mexico, D. F. In Mexico (915) 729–1248 or 729–1240 Outside Mexico (525) 729–1248 or 729–1240 Customer Assistance For The Hearing Or Speech Impaired (TDD/TTY) To assist customers who have hearing difficulties, the manufacturer has installed special TDD (Telecommuni-...
  • Page 379: Warranty Information

    Contract, and you require service after your manufactur- er’s new vehicle limited warranty expires, please refer to your contract documents, and contact the person listed in those documents. We appreciate that you have made a major investment when you purchased your new vehicle. Your dealer has also made a major investment in facilities, tools, and training to assure that you are absolutely delighted with your ownership experience.
  • Page 380: Reporting Safety Defects

    380 IF YOU NEED CONSUMER ASSISTANCE REPORTING SAFETY DEFECTS In the 50 United States and Washington D.C.: If you believe that your vehicle has a defect which could cause a crash or cause injury or death, you should immediately inform the National Highway Traffic Safety Administra- tion (NHTSA) in addition to notifying the manufacturer.
  • Page 381 • Owner’s Manuals. These manuals have been prepared with the assistance of service and engineering specialists to acquaint you with specific Chrysler group vehicles. Included are starting, operating, emergency and maintenance pro- cedures as well as specifications, capabilities and safety tips.
  • Page 382: Department Of Transportation Uniform Tire Quality Grades

    382 IF YOU NEED CONSUMER ASSISTANCE DEPARTMENT OF TRANSPORTATION UNIFORM TIRE QUALITY GRADES The following describes the tire grading categories estab- lished by the National highway Traffic Safety Adminis- tration. The specific grade rating assigned by the tire’s manufacturer in each category is shown on the sidewall of the tires on your car.
  • Page 383: Temperature Grades

    Temperature Grades The temperature grades are A (highest), B, and C, repre- senting the tire’s resistance to the generation of heat and its ability to dissipate heat when tested under controlled conditions on a specified indoor laboratory test wheel. Sustained high temperature can cause the material of the tire to degenerate and reduce tire life, and excessive temperature can lead to sudden tire failure.
  • Page 385 INDEX...
  • Page 386 386 INDEX Adding Fuel ......279 Adding Washer Fluid ....232,324 Additives, Fuel .
  • Page 387 Filter ....... 337 Fluid and Filter Changes ....337 Fluid Level Check .
  • Page 388 388 INDEX Cargo Compartment Luggage Carrier ..... . . 149 Cassette Tape and Player Maintenance ..207 Cassette Tape Player .
  • Page 389 Radiator Cap ......329 Selection of Coolant ....327,352 Cruise Control .
  • Page 390 390 INDEX Air Cleaner Filter ..... . 317 Block Heater ......240 Break-In Recommendations .
  • Page 391 Fuel ....... . . 274 Adding ......279 Additives .
  • Page 392 392 INDEX High Beam/Low Beam Select Switch ..111 Lights On Reminder ....109 Replacing .
  • Page 393 Key-In Reminder ......13 Keyless Entry System ..... . 20 Keys .
  • Page 394 394 INDEX Malfunction Indicator ....165 Oil Pressure ......165 Park .
  • Page 395 Mini-Trip Computer ..... . 124 Mirrors ....... . 81 Automatic Dimming .
  • Page 396 396 INDEX Overheating, Engine ....164,291 Owner’s Manual ..... . . 4,380 Panic Alarm .
  • Page 397 Rear Seat Removal ..... . 93,95 Rear Seating Flexibility ....97,99 Rear Window Defroster .
  • Page 398 398 INDEX Untwisting Procedure ....46 Seats ....... . . 85 Adjustment .
  • Page 399 Linkage ......323 Power ......249,322 Shaft Seal .
  • Page 400 400 INDEX Radial ......264 Replacement ..... . . 266,268 Rotation .
  • Page 401 Vanity Mirrors ......84 Variance, Compass ..... . . 122 Vehicle Certification Label .

Table of Contents

Save PDF