POWER SEATS
DRIVER FRONT RISER AND PEDAL FORWARD SWITCH OPEN - DDM —
Continued
TEST
5
Turn the ignition off.
Disconnect the Driver Seat Switch connector.
Disconnect the Driver Door Module C2 connector.
Inspect the Seat Switch MUX circuit that had the DTC for a possible short to voltage.
Were there any problems found?
Yes → Repair the MUX circuit for a short to voltage.
→ Replace the Driver Door Module.
No
ACTION
Perform POWER SEAT SYSTEM VERIFICATION TEST - VER
1.
Perform BODY VERIFICATION TEST - VER 1.
828
APPLICABILITY
All