Table of Contents
Advertisement
POWER MIRROR
DRIVER MIRROR COMMON OUTPUT SHORT TO GROUND - DDM —
Continued
TEST
3
Turn the ignition off.
Disconnect the Power Mirror connector.
Turn the ignition on.
Measure the Driver Mirror Common Driver circuit to ground.
Is the resistance below 5.0 ohms?
Yes → Repair the Driver Mirror Common Driver circuit for a short to
→ Replace the Driver Door Module.
No
ACTION
ground.
Perform BODY VERIFICATION TEST - VER 1.
Perform BODY VERIFICATION TEST - VER 1.
780
APPLICABILITY
All
Advertisement
Table of Contents
