Table of Contents
Advertisement
Symptom:
MIRROR ADJUSTING SWITCH STUCK - DDM
When Monitored and Set Condition:
MIRROR ADJUSTING SWITCH STUCK - DDM
When Monitored: Continuously.
Set Condition: If the switch is held down for over 15 seconds, this code will set.
DTC PRESENT
DRIVER DOOR MODULE
TEST
1
Turn the ignition on.
With the DRBIII , erase DTCs.
Cycle the ignition switch from Off to Run.
Check for any possible obstructions with the switch and correct if necessary.
Operate the Mirror Adjusting Switch several times.
With the DRBIII , read DTCs.
Does the DRBIII display MIRROR ADJUSTING SWITCH STUCK?
Yes → Replace the Driver Door Module.
→ The condition that caused this code to set is not present at this
No
POSSIBLE CAUSES
ACTION
Perform BODY VERIFICATION TEST - VER 1.
time. Operate the switch several times to ensure it does not stick.
If the switch ever sticks, replace the Driver Door Module.
Perform BODY VERIFICATION TEST - VER 1.
799
POWER MIRROR
APPLICABILITY
All
Advertisement
Table of Contents
