Table of Contents
Advertisement
RIGHT HEADLAMP HIGH BEAM SHORT TO GROUND-IPM —
TEST
4
Turn the ignition off.
Turn the Headlamps off.
Install a substitute Headlamp Bulb in place of the Right High Beam Headlamp Bulb.
Turn the ignition on.
With the DRBIII , erase the IPM DTC's.
Turn the headlamps on.
Switch the headlamps between high beam and low beam several times, pausing for
5 seconds in each position.
With the DRBIII , read IPM DTC's.
Does the DRBIII display this DTC?
Yes → Go To 5
→ Replace the original Right High Beam Headlamp Bulb.
No
5
Turn the ignition off.
Inspect the wiring and connectors associated with the Right High Beam Driver
circuit.
Were any problems found?
Yes → Repair as necessary.
→ Replace the Integrated Power Module.
No
ACTION
Perform BODY VERIFICATION TEST - VER 1.
Perform BODY VERIFICATION TEST - VER 1.
Perform BODY VERIFICATION TEST - VER 1.
EXTERIOR LIGHTING
481
Continued
APPLICABILITY
All
All
Advertisement
Table of Contents
