Table of Contents
Advertisement
POWER MIRROR
Symptom:
*PASSENGER SIDE VIEW MIRROR MOVEMENT INOPERATIVE
FROM ADJUSTING SWITCH
DTC PRESENT
MIRROR ADJUSTING SWITCH
POWER MIRROR
MIRROR DRIVER WIRE OPEN
PASSENGER DOOR MODULE
TEST
1
With the DRBIII , check for DTC's in the Driver Door Module and the Passenger
Door Module.
Does the DRBIII display any power mirror related DTC's?
Yes → Refer to the symptom list for related symptom(s).
→ Go To 2
No
2
With the DRBIII
selected.
With the DRBIII in I/O's observe the Mirror Adjust Switch while depressing the
switch in the inoperative direction.
Does the DRBIII switch displays match the switch positions?
Yes → Go To 3
→ Replace the Driver Door Module.
No
3
Turn the ignition off.
Disconnect the power mirror connector.
Turn the ignition on.
Measure the voltage between the Mirror Common Driver circuit and the inoperative
Vertical or Horizontal Driver circuit while depressing the mirror adjusting switch.
Is the voltage above 10.0 volts?
Yes → Replace the power mirror.
→ Go To 4
No
POSSIBLE CAUSES
ACTION
Perform BODY VERIFICATION TEST - VER 1.
in I/O's ensure the Side Mirror Select Switch displays side
Perform BODY VERIFICATION TEST - VER 1.
Perform BODY VERIFICATION TEST - VER 1.
822
APPLICABILITY
All
All
All
Advertisement
Table of Contents
