Table of Contents
Advertisement
POWER MIRROR
DRIVER MIRROR HORIZONTAL OUTPUT SHORT TO BATTERY - DDM
—
Continued
TEST
3
Turn the ignition off.
Disconnect the Power Mirror connector.
Turn the ignition on.
Measure the voltage of the Driver Mirror Horizontal Driver circuit.
Is the voltage above 1.0 volts?
Yes → Repair the Driver Mirror Horizontal Driver circuit for a short to
→ Replace the Driver Door Module.
No
ACTION
voltage.
Perform BODY VERIFICATION TEST - VER 1.
Perform BODY VERIFICATION TEST - VER 1.
782
APPLICABILITY
All
Advertisement
Table of Contents
