Table of Contents
Advertisement
PEDAL HALL INPUT SHORTED HIGH - MHSAPM/MSAPM —
TEST
7
Turn ignition off.
Disconnect the MHSAPM C1 connector.
Disconnect the Adjustable Pedal Motor connector.
Measure the resistance of the Adjustable Pedal Hall Sense Return circuit between
the Adjustable Pedal Motor connector and the MHSAPM C1 connector.
Is the resistance below 5.0 ohms?
Yes → Replace the Memory Heated Seat Adjustable Pedal Module in
→ Repair the Adjustable Pedal Hall Sense Return circuit for an
No
ACTION
accordance with the Service Information.
Perform ADJUSTABLE PEDALS VERIFICATION TEST - VER
1.
open.
Perform ADJUSTABLE PEDALS VERIFICATION TEST - VER
1.
ADJUSTABLE PEDALS
49
Continued
APPLICABILITY
All
Advertisement
Table of Contents
