Table of Contents
Advertisement
DRIVER REAR RISER SENSOR OUT OF RANGE HIGH - MHSAPM —
Continued
TEST
8
Turn ignition off.
Disconnect the MHSAPM C2 connector.
Disconnect the Driver Rear Riser Seat Position Sensor connector.
Measure the resistance of the Driver Seat Position Sensor Ground wire between the
Driver Rear Riser Seat Position Sensor connector and the C2 connector.
Is the resistance below 5.0 ohms?
Yes → Replace the Memory/Heated Seat Adjustable Pedal Module.
→ Repair the Driver Seat Position Sensor Ground wire for an open.
No
ACTION
Perform POWER SEAT SYSTEM VERIFICATION TEST - VER
1.
Perform POWER SEAT SYSTEM VERIFICATION TEST - VER 1.
855
POWER SEATS
APPLICABILITY
All
Advertisement
Table of Contents
