Table of Contents
Advertisement
AUDIO
Symptom:
INTERNAL FAILURE - AMPLIFIER
When Monitored and Set Condition:
INTERNAL FAILURE - AMPLIFIER
When Monitored: With the ignition on.
Set Condition: The module has failed the loop back test.
INTERNAL FAILURE
TEST
1
With the DRBIII , erase DTC's.
Cycle the ignition switch from off to on and wait approximately 1 minute.
With the DRBIII , read DTC's.
Did this DTC reset?
Yes → Replace the Amplifier in accordance with the service information.
→ Test Complete.
No
POSSIBLE CAUSES
ACTION
Perform BODY VERIFICATION TEST - VER 1.
262
APPLICABILITY
All
Advertisement
Table of Contents
