Table of Contents
Advertisement
PASSENGER MIRROR VERTICAL OUTPUT SHORT TO GROUND - PDM
—
Continued
TEST
3
Turn the ignition off.
Disconnect the Power Mirror connector.
Turn the ignition on.
Measure the Passenger Mirror Vertical Driver circuit to ground.
Is the resistance below 5.0 ohms?
Yes → Repair the Passenger Mirror Vertical Driver circuit for a short to
→ Replace the Passenger Door Module.
No
ACTION
ground.
Perform BODY VERIFICATION TEST - VER 1.
Perform BODY VERIFICATION TEST - VER 1.
815
POWER MIRROR
APPLICABILITY
All
Advertisement
Table of Contents
