Network Status; Verify Operation - Emerson Rosemount 3051S Manual

Rosemount 3051S Wireless Series

NETWORK STATUS

VERIFY OPERATION

4-2
If the Rosemount 3051S Wireless was configured with the Network ID and
Join Key and sufficient time for network polling has passed, the transmitter
should be connected to the network. To verify connectivity, open the 1420
Wireless Gateway's integral web interface and navigate to the
Explorer>Status page.
This page will display the transmitter's tag, PV, SV, TV, QV, Last Update,
Update Rate, Battery Voltage, and Status. A green status indicator means that
the device is working properly. A red indicator means that there is a problem
with either the device or its communication path. For more detail on a specific
device, click on the tag name.
Operation can be verified in three locations, at the device via the Local
Display, using the 375 Field Communicator, or at the Gateway via the 1420
Wireless Gateway's integrated web server.
Local Display
During normal operation, the LCD will display the PV value at the wireless
update rate up to as fast as 1 minute intervals. Refer to LCD Screen
Messages on page 5-6 for error codes and other LCD messages. Press the
Diagnostic button to display the TAG, Device ID, Network ID, Network
Status and Device Status screens. For Device Status screens, see LCD
Screen Messages on page 5-6.
Figure 4-1. Diagnostic Screen Sequence
Tag Device ID
A b c d e i d - X X
X X X X X X
f g h
Reference Manual
00809-0100-4802, Rev BA
Network ID Network Status Device Variables
n e t w k
n e t w k
13 0 5
I D 2 p a r n t
August 2007
S u p l y
7. 2 1
v o l t s