Advertisement
2. Daily care and maintenance
Tools required for Maintenance
Clean Stick
Maintenance cleaning liquid MS2/ES3/HS Kit (for solvent ink)
Cleaning liquid bottle kit (for Aqueos inks)
Wiper kit 33S
Surroundings of the heads ("Cleaning the heads and their surrounding parts" Chapter
4 of the Operation Manual)
The heads and their surroundings are the parts most liable to be tainted in this printer and if tainted, it could
cause adverse effects to the functions of the equipment and the results of the drawings. Moreover, as the head
itself uses very fine mechanisms, sufficient precautions are required for the care and maintenances.
Maintenance cover
Screws
Item Name
1
Move the carriage to the left.
• Move the carriage referring to Step 1, Chapter 4 of the
2
Open the maintenance cover.
• Remove the 4 screws and open the maintenance cover.
3
Clean the head and the surrounding area.
• Gelled ink and dust could stick under the slider and the sur-
• Scrape them off with clean stick. In this case, never rub the
SPC-0527
SPC-0369
SPC-0137
SPA-0134
Operation Manual.
roundings of the head.
nozzle portion of the head.
Clean with the clean stick.
2
Product No.
Nozzle portion
Advertisement
