Meaning Of Errcls And Errcod - Siemens SIMATIC TIM 3V-IE DNP3 System Manual

Diagnostics and upkeep
7.3 SINAUT diagnostics and service tool
Event ID Detailed Status message
(hex) event
(hex)
F460 0808 Message queue overflow (outgoing)
F960 0809 CTS error (incoming)
F860 0809 CTS error (outgoing)
F560 080A UART error (incoming)
F460 080A UART error (outgoing)
F360 080B Status change of the MODBUS slave
(incoming)
F260 080B Status change of the MODBUS slave
(outgoing)
F560 080C Negative S7 acknowledgement re-
ceived (message only incoming)
F560 080D Negative S7 access result received
(message only incoming)
7.3.6.5

Meaning of ERRCLS and ERRCOD

Meaning of ERRCLS and ERRCOD in messages 0113 and 080C
Table 7- 6 Meaning of ERRCLS and ERRCOD (hex)
ERRCLS ERRCOD
FF 01
FF 02
296
Meaning
The LAN connection via which the frame is to be sent is not established. The message is
deleted.
The queue of the LAN connection via which the frame is to be sent has overflowed. The mes-
sage is deleted.
Meaning / remark
Meaning in byte 5 of the diagnostics message:
1 = LAN COM
•
2 = S7 adapter
•
3 = Modbus adapter
•
MODBUS slave not accessible
MODBUS slave accessible
Byte 6 of the message codes the error class (ERRCLS)
and byte 7 codes the error code (ERRCOD). For the
meaning of ERRCLS and ERRCOD, see Meaning of
ERRCLS and ERRCOD (Page 296).
Bytes 6 and 7 of the message code the access result
(hex) with the following meaning:
FF = success
•
01 = hardware error
•
02 = temporary lack of resources
•
03 = object access not permitted
•
05 = invalid address
•
06 = type not supported
•
07 = type inconsistent
•
0A = object does not exist
•
0E...EF: Reserved
•
FE = data unchanged since last access
•
System Manual, 12/2015, C79000-G8976-C253-04
TIM DNP3