Cpus For A Standalone Tim 4R-Ie Dnp3 With S7-400 Or S7-400H - Siemens SIMATIC TIM 3V-IE DNP3 System Manual

1.12.2.3

CPUs for a standalone TIM 4R-IE DNP3 with S7-400 or S7-400H

Compatible CPU types for a standalone TIM 4R-IE DNP3
In standalone mode, in other words, without an S7-300-CPU, the TIM 4R-IE DNP3 is ideally
suited as a communications processor for an S7-400 or S7-400H. They are then linked over
one of the Ethernet ports of the TIM.
With an S7-400 or S7-400H, an Ethernet CP is used as the interface. The following S7-400-
CPUs can be linked over an Ethernet CP:
S7-400
CPU 412-1
CPU 412-2
CPU 412-2 PN/DP
CPU 414-2
CPU 414-3
CPU 414-3 PN/DP
CPU 414F-3 PN/DP
CPU 416-2
CPU 416-3
CPU 416-3 PN/DP
CPU 416F-2
CPU 416F-3 PN/DP
CPU 417-4
S7-400H
CPU 410-5H
CPU 412-3H
CPU 412-5H
CPU 414-4H
CPU 417-4H
TIM DNP3
System Manual, 12/2015, C79000-G8976-C253-04
1.12 Requirements for operation - necessary components and services
ab 6ES7 412-1XJ05-0AB0
ab 6ES7 412-2XJ05-0AB0
ab 6ES7 412-2EK06-0AB0
ab 6ES7 414-2XK05-0AB0
ab 6ES7 414-3XM05-0AB0
ab 6ES7 414-3EM06-0AB0
ab 6ES7 414-3FM06-0AB0
ab 6ES7 416-2XN05-0AB0
ab 6ES7 416-3XR05-0AB0
ab 6ES7 416-3ES06-0AB0
ab 6ES7 416-2FN05-0AB0
ab 6ES7 416-3FS06-0AB0
ab 6ES7 417-4XT05-0AB0
6ES7 412-5HX08-0AB0
6ES7 412-3HJ14-0AB0
6ES7 412-5HK06-0AB0
6ES7 414-4HM14-0AB0
6ES7 417-4HT14-0AB0
Uses and properties of the TIM
(Version 02)
(Version 01)
(Version 01)
(Version 01)
(Version 01)
(Version 01)
(Version 01)
(Version 01)
(Version 01)
(Version 01)
(Version 01)
(Version 01)
(Version 01)
(Version 01)
(Version 01)
(Version 01)
(Version 01)
(Version 01)
35