Siemens SIMATIC TIM 3V-IE DNP3 System Manual page 263

The dialog displays the following information for the station of the selected TIM module:
● The
● The
● The
The lower part of the dialog displays the SINAUT objects and channels with their
parameters:
TD7onTIM Configuration
●
This area lists the following directories of the selected TIM as they are successively
expanded:
– System objects (blue symbols)
– Data objects (yellow symbols)
– The cycle time
– Send and receive channels
Properties
●
This area displays the following properties of an object selected in the directory tree:
–
–
–
The
the following status:
- Blue symbols: Configured data
- Red symbols: Online data
The cycle time is displayed in the
This is the current time of a sampling cycle in which TD7onTIM samples the work memory of
its local CPU. If you click on the cycle time, the corresponding value is displayed in the
Properties
Operator activities
1. Select a TD7onTIM-compliant module in the
2. Open the dialog by selecting the
opens.
3. Expand the directory tree in the
4. Select a SINAUT object or a send or receive channel in the opened directory tree. The
relevant parameters are displayed in the
TIM DNP3
System Manual, 12/2015, C79000-G8976-C253-04
path
of the TIM in the project
subscriber no. of the TIM
subscriber no. of the CPU
:
Parameter name
Value
Comment
Parameter name
column lists the individual parameters with colored symbols indicating
area.
:
TD7onTIM Configuration
SINAUT subscriber list
SINAUT / TD7onTIM Diagnostics
TD7onTIM Configuration
Properties
Diagnostics and upkeep
7.3 SINAUT diagnostics and service tool
box below the last data object.
of the open project.
menu. The dialog
area.
area.
263