Siemens SIMATIC TIM 3V-IE DNP3 System Manual page 271

● The
– In the
– In the
Image 7-7
● The
source, and destination and time stamp of the message. The fields provide the following
information:
–
–
–
TIM DNP3
System Manual, 12/2015, C79000-G8976-C253-04
Hex
tab shows the following in hexadecimal format:
complete buffer
box, the content of the entire message
The 1st block of numbers in each line is the byte number and data begins with the
second block of numbers. Before the net data, there are other blocks of numbers from
the message header, for example the message length etc.
net data
box, only the net data of the message
The 1st block of numbers in each line is the byte number and the net data begins with
the second block of numbers.
Details Hex
dialog,
Source/Destination/Time stamp
Source
: Information on the subscriber number, name, type name, station name, object
number and index number
Destination
: Information on the subscriber number, name, type name, station name
and object number
Time stamp
: Information on the date, time, status, status info.
7.3 SINAUT diagnostics and service tool
tab
tab provides information in its three boxes on the
Diagnostics and upkeep
271