Siemens SIMATIC TIM 3V-IE DNP3 System Manual page 285

Event ID Detailed
(hex) event
(hex)
F260
F360 030F
F260
F360 0310
F260
F360 0311
F260
F560 0312
F560 0313
F560 0314
F560 0316
F560 0317
F560 0318
F560 0319
F460
F560 031A
F460
F560 031B
F460
F560 031C
F560 031D
F960 031E
F360 031F
F960 0320
F960 0321
F960 0322
F960 0323
F960 0324
F960 0325
F360 0326
F360 0327
F360 0328
F260
F560 0329
F360 032A
F360 032B
TIM DNP3
System Manual, 12/2015, C79000-G8976-C253-04
Meaning
Exiting state: Internal / external WAN interface: Subscriber call in main cycle.
Entering state: Internal / external WAN interface: Permanent call to a subscriber enabled.
Exiting state: Internal / external WAN interface: Permanent call to a subscriber ended.
Entering state: Internal / external WAN interface: Lack of resources on a subscriber.
Exiting state: Internal / external WAN interface: Lack of resources on a subscriber eliminated.
Entering state: Internal / external WAN interface: Alternative path changeover on.
Exiting state: Internal / external WAN interface: Alternative path changeover off.
Internal / external WAN interface: No message memory available for new image element.
Internal / external WAN interface: Image element too large for image memory.
Internal / external WAN interface: Set number of subscribers exceeded in image.
Internal / external WAN interface: 'List of Active Stations' (LAS) not available.
Internal / external WAN interface: Error receiving a message.
Internal / external WAN interface: Error enabling message memory.
Entering state: Internal / external WAN interface: Communication with AMPLUS-L task dis-
rupted.
Exiting state: Internal / external WAN interface: Communication with AMPLUS-L task OK.
Entering state: Internal / external WAN interface: Communication with clock driver disrupted.
Exiting state: Internal / external WAN interface: Communication with clock driver OK.
Entering state: Internal / external WAN interface: Communication with routing task disrupted.
Exiting state: Internal / external WAN interface: Communication with routing task OK.
Internal / external WAN interface: Modem command invalid.
Internal / external WAN interface: Invalid dialing string or bad call number transferred to mo-
dem when calling a subscriber.
Internal / external WAN interface: Incorrect handshake PDU received from a subscriber.
Internal / external WAN interface: Own telephone connection occupied.
Internal / external WAN interface: Modem not replying.
Internal / external WAN interface: Access to called subscriber not permitted.
Internal / external WAN interface: No answer tone received from modem of called subscriber.
Internal / external WAN interface: Called subscriber is not operational.
Internal / external WAN interface: Modem of called subscriber has no power.
Internal / external WAN interface: Telephone line is disrupted.
Internal / external WAN interface: Supervision time exceeded. Repetition starting.
Internal / external WAN interface: All attempts to dial a subscriber were executed. No connec-
tion was established.
Entering state: Internal / external WAN interface: Telephone number list with telephone num-
ber(s) of a subscriber deactivated.
Exiting state: Internal / external WAN interface: Telephone number list with telephone num-
ber(s) of a subscriber activated.
Internal / external WAN interface: Telephone number list with telephone number(s) of a sub-
scriber is invalid or disrupted.
Internal / external WAN interface: Telephone number of a subscriber temporarily disabled.
Internal / external WAN interface: Telephone number of a subscriber was changed.
Diagnostics and upkeep
7.3 SINAUT diagnostics and service tool
285