Siemens SIMATIC TIM 3V-IE DNP3 System Manual page 156

The SINAUT Configuration Tool
6.5 The Subscriber Administration
Properties - Local Connection
This dialog displays the properties of the local LAN connection of a TIM module to its CPU.
Image 6-8
For the local connection of the TIM module, you can set the following here:
Send Keepalives for this connection:
●
If this option is enabled, keepalive messages are sent on this connection at the intervals
set in the network configuration for the TIM.
Queue entries [number]
●
Range of values: 10 .. 256
Default: 64
The number of queue entries is the number of messages that the TIM module can buffer
prior to transmission. In general, you do not need to change the default setting.
156
dialog for the TIM
Properties - Local Connection
:
dialog (TIM)
System Manual, 12/2015, C79000-G8976-C253-04
TIM DNP3