Access To Subscribers And Working With The Diagnostics Dialogs - Siemens SIMATIC TIM 3V-IE DNP3 System Manual

● Name: The module, application or PC/PG name. This can be changed in the
configuration. As default, this is the name of the module type or the application as
specified in the configuration.
● Station: Name of the station specified by the user in the configuration using NetPro.
● SINAUT connected: Specifies whether a SINAUT connection was configured for the
subscriber.
● TD7 library version: SINAUT system library for the TD7 software blocks
Nothing is displayed here for DNP3 CPUs because TD7onTIM is used.
● TIM firmware version: With TIM modules, the version of the TIM firmware is displayed.
PG Routing
If you connect a programming device (PG) or a PC to access the diagnostic data, you only
have access to the local network. The diagnostic data of remote subscribers in other subnets
is not accessible.
To access subscribers in other subnets, you can use PG Routing. If you access data in a
subordinate subnet after activating PG Routing, remember that you can only access
subordinate subnets and not subnets higher in the network hierarchy. The prerequisites,
functions and activation of PG routing are described in a separate chapter.
The PG Routing function is possible only when using the
is not possible when using
7.3.1.2

Access to subscribers and working with the diagnostics dialogs

Activating diagnostic functions
The diagnostic functions are activated as follows:
1. Select a subscriber by clicking on it with the mouse in
subscriber list
2. Start the required diagnostic functions with one of the following alternatives:
– Clicking on the corresponding button in the toolbar
– Selecting the function in the
– Pressing the relevant function key
– Right-clicking on the subscriber in
3. The dialog belonging to the selected diagnostic function is displayed.
TIM DNP3
System Manual, 12/2015, C79000-G8976-C253-04
Accessible Nodes
of a STEP 7 project.
After clicking on the subscriber, select the required function with the right mouse
button in the displayed context menu.
7.3 SINAUT diagnostics and service tool
SINAUT subscriber list
.
Accessible Nodes
Project STEP 7 Diagnostics
,
Access of Nodes
Diagnostics and upkeep
; PG Routing
or in the
SINAUT
or menus
SINAUT subscriber list
or in the
SINAUT
.
245