Siemens SIMATIC TIM 3V-IE DNP3 System Manual page 309

EMC
The device meets the requirements of the EC Directive:2004/108/EEC "Electromagnetic
Compatibility" (EMC directive).
Applied standards:
● EN 61000-6-4
Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard
for industrial environments
● EN 61000-6-2
Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for
industrial environments
RoHS
The device meets the requirements of the EU directive 2011/65/EC on the restriction of the
use of certain hazardous substances in electrical and electronic equipment.
Applied standard:
● EN 50581:2012
c(UL)us
Applied standards:
● Underwriters Laboratories, Inc.: UL 508 Listed (Industrial Control Equipment)
● Canadian Standards Association: CSA C22.2 No. 142 (Process Control Equipment)
Report / UL file: E85972 (NRAG, NRAG7)
cULus Hazardous (Classified) Locations
Underwriters Laboratories, Inc.: CULUS Listed 7RA9 IND. CONT. EQ. FOR HAZ. LOC.
Approval for the device
Applied standards:
● ANSI ISA 12.12.01
● CSA C22.2 No. 213-M1987
APPROVED for Use in:
● Cl. 1, Div. 2, GP. A, B, C, D T4
● Cl. 1, Zone 2, GP. IIC T4
Ta: Refer to the temperature information on the type plate of the device
Report / UL file: E223122 (NRAG, NRAG7)
Note the conditions for the safe deployment of the device according to the section Notices on
use in hazardous areas according to UL HazLoc (Page 66).
TIM DNP3
System Manual, 12/2015, C79000-G8976-C253-04
Approvals
309